Level kit designed for pavement
#1
Junior Member
Thread Starter
Join Date: Nov 2018
Location: Houston
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Level kit designed for pavement
I am looking for a leveling kit that will not compromise my factory ride quality. I know it will be a little stiffer, but most of my driving is through pothole pavement.
I am willing to spend money on Fox2.5, King’s, or Icons if I need to, but I feel that is primarily for off-road use. Also, should I be replacing the UCA when looking at 2.5 lift so that I’m not putting stress on factory uca? Are these good systems to run on horrible city streets of Houston?
Or, do you think a simple 2.5 spacer would do the trick?
Let me know now your thoughts on what you are riding now and how you like it.
Thanks!
I am willing to spend money on Fox2.5, King’s, or Icons if I need to, but I feel that is primarily for off-road use. Also, should I be replacing the UCA when looking at 2.5 lift so that I’m not putting stress on factory uca? Are these good systems to run on horrible city streets of Houston?
Or, do you think a simple 2.5 spacer would do the trick?
Let me know now your thoughts on what you are riding now and how you like it.
Thanks!
Last edited by Colancas; 11-02-2018 at 12:15 PM.
#2
I have a 2" spacer and noticed no change in ride quality
#3
Senior Member
#5
Junior Member
Thread Starter
Join Date: Nov 2018
Location: Houston
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
So I changed up the plan a little. Was going to stick with factory rims but I couldn’t resist the Fuel Contra. 2.5 Level kit on front and added 1 inch block to back
thanks for all the feedback
#6
Senior Member
That looks awesome.