When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Downloaded Forscan and now I'm looking for an OBD, can someone suggest me one that will be compatible with my 2018. Found this on Amazon, just want to make sure it'll work.
Downloaded Forscan and now I'm looking for an OBD, can someone suggest me one that will be compatible with my 2018. Found this on Amazon, just want to make sure it'll work.
Thanks!
Dexter
That'll work if you want Bluetooth but this USB one works just as good and is faster for less money:
Couple Question
1. I have set my my DRLs to be my fog lights. When you put the blinker on can you kill that side Fog light?
2. Can you have fogs as courtesy lights? When i unlock my truck with the key fob would like to have the fogs come on.
3. I have tried to set up the NAV while driving but cant seem to write the code to the truck it always errors
4. In spread sheet i see that there are fm/am presets? What are they used for? I would love to get rid of AM and shrink my FM down to one bank.
5. I have added an aftermarket sub works great. But does anyone know if you can control the gain from thead head unit? When i go inot sound settings it just bass treble... Was hoping for sub out control.
Thanks for the help in advance.
I have a 2018 F150 XLT
For number 1, try 726-26-02 xxx1 xxxx xxxx DRL Switchback w/Turn Signal
can the door chimes, well all chimes be turned off with app?
Yes, I have no chimes at all when I start the truck. The only one I still have is if you open the door with the truck running while not in park.The only one I've noticed anyway.
I bought a canadian F-150 2018 Lariat Sport (LED Lights) and I'd like to activate the small stripe in the middle of the headlight in addition to the white stock DRL (see mark in picture). I'd like to see it enabled when driving in the dark as well. Can anyone help me to find the correct settings in the BCM. I have the spreadsheet of the '17 model but I'm not sure if it helps with the 18 model.
New to FORScan and new to the forum though I have been reading for a while. I attempted to back up all the AS BUILT modules today and all went fine until I reached the last two. They are the SCME (seat control module E) and DSM (drivers seat module) modules. Each attempt would initialize but then quickly display "Service procedure has been interrupted". Using the latest version of FORScan with the OHP Ford ELMconfig USB adapter. Truck is 2016 F-150 Lariat 3.5L EcoBoost. Any help or assistance appreciated.
10-24-2018, 12:04 AM
