Yes, Forscan software has access to DSP and ACM modules. You can use Forscan to view and change the settings of these modules.

Lobo
 

I have a 2018 rcsb with sync 3.4 that is the latest version. Can I change the start up to a lobo. I have the spreadsheet but I not sure how to change it. I don't want to brick the apim. Thanks

----

I have the 2017 F150 and I have the OBDLink EX, now I need a Windows 10 tablet/laptop and USB A port. Forscan is the only thing I will use it for, so would like to spend the least amount. (I'm a Mac guy).

This seem like a smaller, easier to maneuver tablet/notebook, rather than a full blown laptop AND the price is under $100. Will this be ok or is it a bad idea, or is there something cheaper that will work?:
https://www.newegg.com/p/1TS-000D-17...9SIB9ADK3T9554

That looks more than adequate to run FORScan.

Thank you.

The only other thought I had, I see some people use a tablet as a large display on their dash with a custom holder. I haven't had the time to see exactly what the gain is other than a big screen or how its connected to work and if a Forscan capable tablet would work.

I have looked through forums and Livinitup's excel doc, cant find an answer.

IMO, the cruise contol on my 2018 XL 3.3L can be a bit abrupt at times.
Like if I encounter a hill, as speed drops cruise jumps on the gas.
I would like to tone it down a little. Two trucks ago I had a 94 F150 that had very smooth cruise. Came on slowly and increased gradually.
Is cruise behavior adjustable in Forscan? If so please point me to the module and parameter.
Thanks
JMD