Livnitup

Try the following:
7D0-01-01 2A2A 0403 0034
OR
7D0-01-01 2A2A 0403 2357 (Heated Seats)

AND

7D0-01-02 02A9 0204 8A15 (Climate & NAV)
OR
7D0-01-02 0089 0204 82EB (Climate, No NAV)

The bold bytes on each address are what's needed for Climate Menu

Timc74

Thanks. Will give it a try tomorrow night

pepatrick

Confirmed. These options worked with mine. I did heated seats and climate with nav option. 2016 XLT 302a

HwyCycle

Livnitup- thanks!

Pepatrick-
I have the same set-up, what are you able to control from the climate screen? Just the heated seats?

bignfast

Not sure about a 2015 but i did enable cruise via forscan and installed a new switch with the cruise buttons on my 2013 xl company truck. Works just as if factory installed. I would say if you can get the buttons on the wheel it could be done.

pepatrick

heated seats
defroster
vent control
AC with options

The auto, fan control and dual temps does not work, but fan displays when you manually adjust fan speed.

Timc74

Worked for me. Used codes for heated seats and climate w/o Nav

Thanks for your help

remltr

Just an FYI: Since I turned on the heated/cooled seat icons yesterday, when I start the truck the screen displays nav on the left side, audio on top right and heated/cooled seats on the bottom right. Previous to that it would simply display whatever audio source I was using last when I turned the truck off.

Livnitup

Did you use the Forscan PID option or do it manually? What are your current values at 7D0-01-01? Also, are you getting any DTCs in APIM when you connect Forscan?

LocDown

Anyone?