Edge Evolution for '07 F-150 5.4 Triton
10-05-2007, 11:06 AM
#1
Junior Member
Thread Starter
Join Date: Oct 2007
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Edge Evolution for '07 F-150 5.4 Triton
Just put new edge evolution in my truck. Programmed to economy mode last night, all was well...
Went to start truck this morning, starter went bananas until i turned key off and the back and it caught. Put stock program back in and drove to coffee shop fine, tried to put it back in economy and then drive and it skipped like crazy.
I've since gotten all updates from the Internet and tried again. Same issue with starter, but once started...drove fine.
Thoughts?
Went to start truck this morning, starter went bananas until i turned key off and the back and it caught. Put stock program back in and drove to coffee shop fine, tried to put it back in economy and then drive and it skipped like crazy.
I've since gotten all updates from the Internet and tried again. Same issue with starter, but once started...drove fine.
Thoughts?
10-09-2007, 07:27 PM
#6
08 February TOTM
Join Date: Nov 2006
Location: Dumfries, VA Member: #77
Posts: 3,184
Likes: 0
Received 19 Likes
on
7 Posts
Edge is replacing mine. I sent it in for a new screen because the it had a burn in it from the heat. They said instead of replacing the screen they just sent me a new unit 
Now the question I gotta ask myself is do I sell it as a new unit and by the Xcal or just use it and pray I don't have the shudder issue with this one like the last had. I had the PCM reflashed so my HEX code is going to be different now. That makes me wonder it I will still have the same issues or not with the level three shudder I had with the other unit.
Now the question I gotta ask myself is do I sell it as a new unit and by the Xcal or just use it and pray I don't have the shudder issue with this one like the last had. I had the PCM reflashed so my HEX code is going to be different now. That makes me wonder it I will still have the same issues or not with the level three shudder I had with the other unit.
10-09-2007, 08:54 PM
#7
none.
Join Date: May 2007
Location: West Palm Beach, FL
Posts: 3,840
Likes: 0
Received 97 Likes
on
78 Posts
Edge is replacing mine. I sent it in for a new screen because the it had a burn in it from the heat. They said instead of replacing the screen they just sent me a new unit Now the question I gotta ask myself is do I sell it as a new unit and by the Xcal or just use it and pray I don't have the shudder issue with this one like the last had. I had the PCM reflashed so my HEX code is going to be different now. That makes me wonder it I will still have the same issues or not with the level three shudder I had with the other unit.
Now the question I gotta ask myself is do I sell it as a new unit and by the Xcal or just use it and pray I don't have the shudder issue with this one like the last had. I had the PCM reflashed so my HEX code is going to be different now. That makes me wonder it I will still have the same issues or not with the level three shudder I had with the other unit.Trending Topics
10-11-2007, 09:51 PM
#9
08 February TOTM
Join Date: Nov 2006
Location: Dumfries, VA Member: #77
Posts: 3,184
Likes: 0
Received 19 Likes
on
7 Posts
It wouldn't work in my truck. I called Edge and spent a 1/2 hr on the phone with them trying to get it to update, it wasn't happening. So they are sending me another unit. I should have it tomorrow because the are overnighting it to me. Really make me think more about going with a custom tuner. I think I'll give it another shot. If the level three is still shuddering though, I'm probably gonna sell it.HERE
Last edited by whitecrystal1; 10-12-2007 at 01:09 AM.
