Topic Sponsor
General F150 Discussion General Ford F150 truck discussions and questions
Sponsored by:
Sponsored by:

At Dealership - 3.31 Ratio Axle versus optional 3.55 ratio limited slip axle

Thread Tools
 
Search this Thread
 
Old 03-29-2014, 06:00 PM
  #1  
Junior Member
Thread Starter
 
kevin70's Avatar
 
Join Date: Mar 2014
Posts: 23
Likes: 0
Received 1 Like on 1 Post
Default At Dealership - 3.31 Ratio Axle versus optional 3.55 ratio limited slip axle

Looking at 2013 F150 STX Supercabs with V8.

One dealer has 3.31 axle vehicles. One has 3.55 option vehicles.

How much of a difference does it make? I will do occasional towing, but not huge boats or trucks (would tow like a bass boat).

I would rather have the 3.55, but I dont know if it matters much. The dealer with the 3.31 is about $400 cheaper (plus the $350 less since it doesnt have the optional axle) and the dealership experience has been much better.
Old 03-29-2014, 06:30 PM
  #2  
Senior Member
 
Wannafbody's Avatar
 
Join Date: Feb 2014
Location: Pittsburgh Pa
Posts: 2,121
Received 172 Likes on 145 Posts

Default

I'd spend the extra few bucks for the 3.55, that's what I did. Maybe see if the 3.55 dealer will drop the price a bit.
Old 03-29-2014, 06:39 PM
  #3  
Old Man
 
tufcat's Avatar
 
Join Date: Apr 2010
Location: Thonotosassa, FL
Posts: 78
Likes: 0
Received 7 Likes on 6 Posts

Default

I have had both. I (personally) would pay for the 3.55s.
Old 03-29-2014, 06:40 PM
  #4  
Canuck with a truck
 
f150skidoo's Avatar
 
Join Date: May 2011
Location: Ontario, Canada
Posts: 2,475
Received 50 Likes on 46 Posts

Default

The 3:31 will give you a little bit better mpg then the 3:55, but the 3:55 will give you better towing power. 3:55 is a very good all round axle ratio for towing and fuel economy.
The following users liked this post:
Wannafbody (03-29-2014)
Old 03-29-2014, 06:56 PM
  #5  
Senior Member
 
LarryXLT's Avatar
 
Join Date: Jun 2010
Posts: 240
Received 76 Likes on 39 Posts

Default

3:55 Locker
FTW
Old 03-29-2014, 07:02 PM
  #6  
Junior Member
Thread Starter
 
kevin70's Avatar
 
Join Date: Mar 2014
Posts: 23
Likes: 0
Received 1 Like on 1 Post
Default

Thanks guys. The sales guy who was at the dealer I like told me he was going to check the rest of the lot and see if he could find a 3.55. He did find one which included the other options I wanted (not that many options with the STX). So I got a STX Supercab with 201A package, carpet package, 5.0 V8, and 3.55 axle. Not fancy compared to what alot of people get, but it will meet my needs well. It is red. The one at the other dealer was silver (all things equal I would have gotten silver just because it is easier to keep clean looking). However, I saved $500, had a better dealer experience, and I actually like the look of red a little better.

Thanks for you guys help. Helped me decide to stick with the 3.55 which encouraged the sales guy to walk around the lot looking for one.

Now I just have to go through financing (required to get a $2000 rebate).
Old 03-29-2014, 08:50 PM
  #7  
Senior Member
 
gregsf150stx's Avatar
 
Join Date: Nov 2010
Location: TN
Posts: 4,809
Received 531 Likes on 407 Posts

Exclamation

you will love the red! Keep it shiny!! (3.55)
Attached Thumbnails At Dealership - 3.31 Ratio Axle versus optional 3.55 ratio limited slip axle-new3.jpg  
Old 03-29-2014, 09:37 PM
  #8  
Raptor Minion
 
ZBoater's Avatar
 
Join Date: Mar 2014
Location: Florida
Posts: 911
Received 136 Likes on 105 Posts
Default

Very nice! I like red trucks a lot.
Old 03-29-2014, 09:41 PM
  #9  
Senior Member
 
gregsf150stx's Avatar
 
Join Date: Nov 2010
Location: TN
Posts: 4,809
Received 531 Likes on 407 Posts

Exclamation

the 3.31 needed a little bit more "umph" to up to speed and into 6th gear (would rev higher in each gear--and stay in each gear longer-- until it got in 6th), and lets say 50mph. - - I had a 5.0 with the 3.31


the 3.55 get up to speed faster, and is in 6th before you know it. (now have a v6 with 3.55)
Old 03-29-2014, 10:37 PM
  #10  
Senior Member
 
2012platinum's Avatar
 
Join Date: Dec 2012
Location: hattiesburg,mississippi
Posts: 3,152
Received 231 Likes on 213 Posts
Default

Go with the 3.55's man. I like mine. Rode in a friends with 3.31 and didn't like it. Felt sluggish and didnt have the pull like the 3.55's. I'm actually wanting to go done to 4.10's


Quick Reply: At Dealership - 3.31 Ratio Axle versus optional 3.55 ratio limited slip axle



All times are GMT -4. The time now is 01:32 AM.