Can't ignite - Full Accessory Power Active F150 2017 Lariat
03-01-2019, 04:56 PM
#11
Junior Member
Hi, I bought a new F150 2018, V6 3.5 EcoBoost. Today I became "Full Accessory Power Active". He also hardened the brake pedal. The car did not start. I was waiting for 20 minutes and then everything was fine. I do not understand what happened. I am from Slovakia - Europa Union, and here is FORD service a big problem. I read a manual but I did not find this message. What should I do? Is it serious damage? Thank.
03-01-2019, 07:46 PM
#12
Senior Member
Some of these messages are a big mystery. What the hell does Full Accessory Power Active really mean?
Wish the hell auto manufacturer's would give more detailed info when hitting 'OK'.
Or maybe there needs to be an OBD-III diag data base for mysterious messages or something similar.
Wish the hell auto manufacturer's would give more detailed info when hitting 'OK'.
Or maybe there needs to be an OBD-III diag data base for mysterious messages or something similar.
The following users liked this post:
AntonSVK (05-16-2019)
The following users liked this post:
2017bluetruck (01-27-2020)
03-03-2019, 11:28 AM
#16
03-03-2019, 12:03 PM
#19
03-04-2019, 06:48 PM
#20
Senior Member
The point is at least with my '16 with key start, it does NOT require the brake pedal to be depressed while cranking on the key.
Far as i know all push button starts need to have the brake pedal pressed in order to start the engine.
Same with my Jeep GC with push button start.
With my GC, if i push the start button WITHOUT pressing the brake pedal, it goes in accessory mode without starting the engine.
Far as i know all push button starts need to have the brake pedal pressed in order to start the engine.
Same with my Jeep GC with push button start.
With my GC, if i push the start button WITHOUT pressing the brake pedal, it goes in accessory mode without starting the engine.