Topic Sponsor
General F150 Discussion General Ford F150 truck discussions and questions
Sponsored by:
Sponsored by: Real Truck

33/12.5/18lt on 2010 F150 XLT 2wd????

Thread Tools
 
Search this Thread
 
Old May 20, 2016 | 09:36 AM
  #1  
mayday1990's Avatar
Thread Starter
Junior Member
 
Joined: May 2016
Posts: 3
Likes: 0
From: Tampa, FL
Default 33/12.5/18lt on 2010 F150 XLT 2wd????

I'm looking at getting new tires on my 2010 F150 XLT 2wd, currently I have 275/60/20 on but I'm looking at getting 33/12.5/18LT with 18x9 KMC XD Rockstar wheels with lug pattern of 6x135(6x5.3)/6x139.7(6x5.5)! I found them on Craigslist brand new for $1700 plus TPMS Schrader sensor! I know they will rub with what my suspension is right now but I'm worried even with a lift will they rub? Does anyone have advice or can give me some insight what I should do? I think I have a little bit of level currently on it because it sits little higher than stock. Please help lol
Reply
Old May 21, 2016 | 05:26 AM
  #2  
lighty's Avatar
Senior Member
 
Joined: Nov 2012
Posts: 6,142
Likes: 66
From: Tenn
Default

I'm by no means an expert on this at all, but I've seen people say 35's will fit on a lot of these trucks with just a leveling kit. So if you're getting 33's you should be good all day. I could be wrong but if nothing else get the wheels and tires and then u can see what u need. On my '07 my front lift is only 2 3/4" and I'm running 35x12.50r17's with no rubbing or trimming. Hopefully someone else can chime in and help, hope it works out ok, let's see some pics when you get them on.
Reply
Old May 21, 2016 | 04:38 PM
  #3  
mayday1990's Avatar
Thread Starter
Junior Member
 
Joined: May 2016
Posts: 3
Likes: 0
From: Tampa, FL
Default

Thank you! I just went and bought them. I was looking online and rough country 4inch lift recommends 33x12.5 tire so far seems like it's going to work out! I want a lift anyway!
Reply
Old May 21, 2016 | 09:54 PM
  #4  
lighty's Avatar
Senior Member
 
Joined: Nov 2012
Posts: 6,142
Likes: 66
From: Tenn
Default

Sweet man, get some pics up when it's done.
Reply




All times are GMT -4. The time now is 04:06 AM.