2018 2.7 ecoboost misfire
#12
Junior Member
Thread Starter
Join Date: Mar 2018
Location: Winnipeg Canada
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
comes on again after 150klms since I picked it up.
took it back to the dealership yesterday turns out now I need a cataytic converter which is on back order.
Starting think it’s a Monday morning or Friday afternoon truck.
#13
Senior Member
The 2.7 must be hard on plugs and converters.
#14
Junior Member
Thread Starter
Join Date: Mar 2018
Location: Winnipeg Canada
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
When I picked up the truck from the dealership they told me if could be a bad batch of plugs.
and then with the misfire some of the unburnt gas most likely got into the converter, which is why that needs to be replaced... will report more when I get the converter replaced
and then with the misfire some of the unburnt gas most likely got into the converter, which is why that needs to be replaced... will report more when I get the converter replaced
Last edited by dave2018; 04-10-2018 at 08:52 PM.
#15
Just drove back a brand new 2018 2.7eb with 100km on odo, cel came on the freeway and after scanning it, it shows random misfire on 1,5,6
no loss of power, and hasn't comeback after I reset it. will call dealer tomorrow
no loss of power, and hasn't comeback after I reset it. will call dealer tomorrow
#16
Junior Member
Thread Starter
Join Date: Mar 2018
Location: Winnipeg Canada
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Picked up the truck yesterday after the converter was replaced.
everything seems to be running like it did before the misfire.
will post if another issue comes up.
everything seems to be running like it did before the misfire.
will post if another issue comes up.
#17
Got a chance to play with forscan (disabled start/stop)
saw 1 count cyl3 misfire but that will not cause a cel (limit is 65xxx counts)
200kms on odo
will bring to dealership next week anyway for trailer brake controller install and ask to check it with ford ids
saw 1 count cyl3 misfire but that will not cause a cel (limit is 65xxx counts)
200kms on odo
will bring to dealership next week anyway for trailer brake controller install and ask to check it with ford ids
#18
New to the forum,
My 2016 2.7 screw 4x4 got dropped off at the dealership today. I had CEL on with P0304 code (misfire #3 cylinder). It started to take longer to start last week and then this code popped up. I cleared the code but it came back. Saw the TSB for this code and my engine was built within that time frame. I'll post an update once I get a call from the dealership.
My 2016 2.7 screw 4x4 got dropped off at the dealership today. I had CEL on with P0304 code (misfire #3 cylinder). It started to take longer to start last week and then this code popped up. I cleared the code but it came back. Saw the TSB for this code and my engine was built within that time frame. I'll post an update once I get a call from the dealership.
#19
Junior Member
So I just got a check engine light myself on my 2018 2.7 Lariat 4x4. I bought it in April and it has 4300 miles. It was nice that you get the alert on the app telling you its a misfire instead of just a plain CEL. I dropped it off at the dealership this morning, hoping its nothing serious. I want to note since purchase I have only run Premium Fuel in it, 93 octane.
Ford App Alert CEL Misfire
Ford App Alert CEL Misfire
#20
my 2018 XLT 2.7 ecoboost started to shake and the engine light came on.
when i took it to the dealership on my home today, they did a scan.
they told me cylinders 1,2,3 were reading a misfire. the engine only has 2800 klms on the engine.
they will call me tomorrow with what they find out.....anyone seen this before or have any insight
into why this happened?
when i took it to the dealership on my home today, they did a scan.
they told me cylinders 1,2,3 were reading a misfire. the engine only has 2800 klms on the engine.
they will call me tomorrow with what they find out.....anyone seen this before or have any insight
into why this happened?