Calli_in_Texas

That's a good point I will. I need to get the offset info from the shop. I believe they were 0mm offset Pro Comp Alloys 7098's. When I tested them on the 285/55/20's they stuck out way to far for my liking. Which is why I went with the XD Monsters which I believe to be a +19mm offset.

I'll double check my info and get back with you guys later.

20104x4

i put a 2in on mine and had 315 70 17 on my factory wheels and no rubbing at all even in drive ways nothing.

Infidel4life11

I have an 04 fx4 Scab with a 2.5 and 325-60r18 nitto on factory wheels with no issues. I know the bodies and fenders are different but I don't have any issue looks like there is enough room for me to go up to a 325-65R18.

doug69

I have a 2011 lariat screw with a 3 inch level and 325/65/18 would NOT fit. The height is not the problem, it's the width. They would rub bad they are almost 13in wide. Maybe a non lariat they might fit with the proper offset. I have that extra trim pc. around wheel wells. Good Luck