Interior painting
#1
Member
Thread Starter
Join Date: Mar 2012
Location: Birmingham,Al
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Interior painting
I have what I consider the ugly 2 tone tan interior..........
I want to paint my door panels black and leave the leather inserts the darker tan.
Suggestions on the best wearing paint to use?
any suggestions will be appreciated.
I want to paint my door panels black and leave the leather inserts the darker tan.
Suggestions on the best wearing paint to use?
any suggestions will be appreciated.
#2
Member
Thread Starter
Join Date: Mar 2012
Location: Birmingham,Al
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
96 views and not one DAMN response...........WTF!!!!!!!!!
If there is a help section,someone please move this thread there so I can get some input.
I cannot believe that not one single person would respond.
If there is a help section,someone please move this thread there so I can get some input.
I cannot believe that not one single person would respond.
#3
Sure, I did my Old Tacoma this way and it holds up well.
Take off your panel, if its going to be a smooth surface, scuff it with a 1500 scuff pad and use degreaser to get all the crud off.
Mask it, then spray with Bulldog Adhesion promoter.
Paint it, I used duplicolor engine paint, its tough and sprays well. then clear with either gloss or a matte clear, done. I did my whole truck black and it looked great, the clear helps protect it.
Take off your panel, if its going to be a smooth surface, scuff it with a 1500 scuff pad and use degreaser to get all the crud off.
Mask it, then spray with Bulldog Adhesion promoter.
Paint it, I used duplicolor engine paint, its tough and sprays well. then clear with either gloss or a matte clear, done. I did my whole truck black and it looked great, the clear helps protect it.
#4
Member
Thread Starter
Join Date: Mar 2012
Location: Birmingham,Al
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the information....
I absolutely hate the 2 tone tan........no combination I have looked at goes with the darker portion except black..
I am gonna give it a shot and see what happens.
I absolutely hate the 2 tone tan........no combination I have looked at goes with the darker portion except black..
I am gonna give it a shot and see what happens.
#6
Member
Thread Starter
Join Date: Mar 2012
Location: Birmingham,Al
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Find a good paint shop and have them do it! I had a paint shop in Vegas paint my interior part in my NSX when I had it. You will see the difference in quality if you use a rattle can!
#9
The Bees Knees
Join Date: Sep 2010
Location: Norman, OK
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
I have used this with great success in the past
http://www.duplicolor.com/products/vinylFabricCoating/
Oh, and don't be a tool next time it takes a bit for a response...
http://www.duplicolor.com/products/vinylFabricCoating/
Oh, and don't be a tool next time it takes a bit for a response...
#10
I would like to do that to mine too. I have a complete grey interior and I don't like it. I would like to do something with black and red ( not too much red just enough to stand out) any suggestions?