2010 f150 0-60, 1/8th, 1/4, and hp figures done in winter conditions!
#1
Junior Member
Thread Starter
Join Date: Jun 2014
Location: Minot, ND
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
2010 f150 0-60, 1/8th, 1/4, and hp figures done in winter conditions!
I was just out rolling around today and decided to see what my truck could do and i figured if anyone else wanted to know what to expect from the same setup, i might as well post my results.
The app used to get these results was Torque for Android and i used a Bluetooth OBD2 adapter.
My truck is a crewcab, 4x4, 6.5 foot bed, 7350 gvwr with 3.55 gears.
5.4 triton of coarse and the only thing i have in it that isnt stock is a k&n drop in filter.
Oh, and 6 ply A/T tires.
Two runs were done on a straight country road, 15 degrees out and almost no wind, take off had a little wheelspin and i wouldnt trust the hp figure too much for it just uses a simple formula to spit a number out.
I figured i better be specific about everything.
The app used to get these results was Torque for Android and i used a Bluetooth OBD2 adapter.
My truck is a crewcab, 4x4, 6.5 foot bed, 7350 gvwr with 3.55 gears.
5.4 triton of coarse and the only thing i have in it that isnt stock is a k&n drop in filter.
Oh, and 6 ply A/T tires.
Two runs were done on a straight country road, 15 degrees out and almost no wind, take off had a little wheelspin and i wouldnt trust the hp figure too much for it just uses a simple formula to spit a number out.
I figured i better be specific about everything.