7.3 Powerstroke Running Rough - No Codes
Joined: Jun 2014
Posts: 31,719
Likes: 12,550
From: Nowhereville, Barton City Michigan
Not sure how bad it's running rough, but anyone think to do the wiggle test on the under the valve cover wiring harness connector? IIRC, that and a couple other years around that time, had a defective connector on that harness.
Did the other shop figure something out I’ve went through everything except the ipr.. no problems starting or running fires right up / getting a surge 500/800 rpm with constant engine light that goes off & back on stopping the misfire for 1/2 seconds during surge when I accelerate engine then stays in a misfire with constant engine no surge. With a loss of power! A very slow acceleration to 45 mph max….before this truck ran with power until I got on it 50% throttle or more then it would throw an engine light. If I would let off fast enough misfire would go away. If I didn’t misfire would stay on until I turn the truck off & back on something I’ve been chasing but now I’m stuck in misfire!?!? Note : also before I changed & checked the fuel filter & bowl it used to be clean now it’s all dirty cleaned it out & filled bowl with seafoam to clean the injectors but nothing changed also pretty sure the screen came off in the tank after the driveshaft bearing hit the tank a few times when it broke on me so I’m sucking trash but I ran a line to another tank & still the same thing and also fuel bowl fills up quickly with no problems but I got more settlement at the bottom of the bowl after cleaning it..Someone please help what should I do?









