Topic Sponsor
Pre- 1987 / Classic Corner Have a classic Ford F150 truck? Want a classic? Discuss your pre-1987 Ford F150 truck.

TTB Steering Stabilizer

Thread Tools
 
Search this Thread
 
Old 05-15-2018, 03:26 PM
  #11  
Member
 
Redneck11's Avatar
 
Join Date: Apr 2017
Location: Louisiana
Posts: 74
Received 5 Likes on 5 Posts
Default

Originally Posted by TheWade
Sorry, I meant what coilovers did you have on your truck?
58591 is the set I had on mine
Old 05-15-2018, 03:33 PM
  #12  
Junior Member
 
TheWade's Avatar
 
Join Date: May 2018
Posts: 8
Received 0 Likes on 0 Posts
Default

Originally Posted by Blue85
Thanks for the input especially since we have the same model truck! But I’ve been looking at a Monroe brand stabilizer that comes with all the brackets from Oreilly’s for only $40. Sounds like a pretty good deal from all of the positive feedback from them.
Looked into these, they are $70 at my local O' Reillys. Sucks for me haha. But I found some on rock auto for $46.
Old 05-15-2018, 03:48 PM
  #13  
Junior Member
 
TheWade's Avatar
 
Join Date: May 2018
Posts: 8
Received 0 Likes on 0 Posts
Default

Originally Posted by Redneck11


58591 is the set I had on mine
Do you know if these would work on a 2WD? Not sure what kind of truck you had.

Also, as far as suspension goes, do you know what I can use from the 4WD truck on the 2WD without any fab work? I will be using the truck with some heavy loads and don't want to stress the rear suspension too much.
Old 05-15-2018, 03:52 PM
  #14  
Member
 
Redneck11's Avatar
 
Join Date: Apr 2017
Location: Louisiana
Posts: 74
Received 5 Likes on 5 Posts
Default

Originally Posted by TheWade
Do you know if these would work on a 2WD? Not sure what kind of truck you had.

Also, as far as suspension goes, do you know what I can use from the 4WD truck on the 2WD without any fab work? I will be using the truck with some heavy loads and don't want to stress the rear suspension too much.
mine was 4wd, as far as I know the rear suspension and steering are interchangeable. I am not 100% sure on that though, I’d do a little bit more digging on different threads and sites to learn more but I haven’t messed much with any 2wd ttb-twin I beams.
The following users liked this post:
TheWade (05-15-2018)




All times are GMT -4. The time now is 06:40 AM.