crawfishman

I have access to a throttle body from a 2012 GT mustang BOSS 302, that was removed from the car shortly after purchasing it.. My question is, will it fit my 2013 5.0 F 150? And,,, is the effort worth it? Other performance mods on the truck are JLT cold air intake, SCT tuner with a Tune from OZ, dual exhaust. I appreciate any help on this.

blue5.0

The throttle body should fit just fine. It is an aftermarket T/B as the boss shares the same 80 mm t/b your truck and the gt's have. That t/b is probably too large for your mods and application, unless you have lofty plans in the future. What brand is it? I've read that the 90 mm BBK t/b can be challenging to tune properly. Also, if you are still leaning that way, how much? You can buy a stock 87 mm t/b and adapter plate for a gt350 brand new for about $250.

crawfishman

Thanks the the reply Blues, you asked if its an aftermarket TB, Well, all i can tell you is the car that it came off of was a month old, it was all OEM stuff that was removed. he upgraded all kinds off stuff under the hood. so you dont think that the hose from the JLT cold air will fit onto the throttle body? I never even measured it, i can do that tomorrow. I have a custom tune in the truck as it is, from OZ, he may have to redo the tune if i swap out the TB

crawfishman

Ill look tomorrow also and check to see if theres a MFG name on that TB. I appreciate your info. Thanks again!!!

blue5.0

Yes, you will probably be able to get it to fit just fine. I'm saying that a 90 mm t/b is overkill for your mods on your truck and some of the 90 mm t/b are challenging to get dialed in. I wouldn't recommend this for you at this time at least.

crawfishman

hey, hows it going Blue, ok i actually have the TB in my hand, and the only marks i see on the TB itself ar FO MO CO., i knew it was a Ford part, however i dont see any other identifying numbers or marks.

crawfishman

I found the part#!!!!! Br3e-9f991-ad

blue5.0

Hey friend, that is just a good ole stock 80 mm t/b from a coyote truck.