When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Performance, Tuning, and (LEGAL) RacingPost discussions about increasing performance, capabilities, and racing.
****WARNING**** Street racing or illegal activities will be removed and potential bans will
be handed out.
Cody sent me an order form and I filled it out and sent it in. No part numbers yet, but he knew what I wanted. I will share part numbers if I see them first
Hey Guys just an FYI.... if you just try and order the new Tube and Box kit.. Whipple is going to want $375. I was working with Cody and told him that Dustin told us the $275 + $50 shipping. Cody put me on hold and went and talked with Dustin, he came back and said they would give it to me for the $275. So not sure if that will be a "Special Deal" or not. Just be aware... I think they are going to normally charge $375 for the Box and Tube.
I asked about using my current tube and was told our current tube will not work. Still no part numbers but this is the invoice he sent me before I asked about the price.
I would just need the closed box. With my older truck the inlet is 2” lower than 18^ trucks. I’ll build my own tube with aluminum mandrel bends. Don’t really have a choice.
I might look for a used S&B closed box and build off that.
I would just need the closed box. With my older truck the inlet is 2” lower than 18^ trucks. I’ll build my own tube with aluminum mandrel bends. Don’t really have a choice.
I might look for a used S&B closed box and build off that.
According to Cody, the box without tube is $275, so Tube is $100. And yeah... before this came out I was very much looking at getting a S&B or Airaid and modifying them to work with our tube. And I would love to be able to fab up a tube in aluminum instead of the plastic, I could then polish or powder coat with Super Chrome and have some more bling in my engine bay.
According to Cody, the box without tube is $275, so Tube is $100. And yeah... before this came out I was very much looking at getting a S&B or Airaid and modifying them to work with our tube. And I would love to be able to fab up a tube in aluminum instead of the plastic, I could then polish or powder coat with Super Chrome and have some more bling in my engine bay.
So we need the $375 one with the tube? The tube looks shorter then on mine...Perhaps its the angle?
Wouldn't an aluminum tube be more prone to heat soak?
02-02-2019, 10:14 PM
