2016 F150 Platinum Need Roush Calibration Loaded in Dallas, TX area
#1
Junior Member
Thread Starter
2016 F150 Platinum Need Roush Calibration Loaded in Dallas, TX area
Hello!
First time poster, long time lurker..
I bought the level 1 Roush power pack w/ engine calibration for my 2016 3.5l ecoboost and I am having a hard time finding a dealer that will program the calibration. Is there anyone that can suggest a place or help with installation in the Dallas area? My understanding is that it's a 15 minute process with a J2534 pass-through device.
Any help would be much appreciated. Below is a link to what I purchased.
https://www.roushperformance.com/par...ck-level1.html
Thanks!
-Mike
First time poster, long time lurker..
I bought the level 1 Roush power pack w/ engine calibration for my 2016 3.5l ecoboost and I am having a hard time finding a dealer that will program the calibration. Is there anyone that can suggest a place or help with installation in the Dallas area? My understanding is that it's a 15 minute process with a J2534 pass-through device.
Any help would be much appreciated. Below is a link to what I purchased.
https://www.roushperformance.com/par...ck-level1.html
Thanks!
-Mike
#2
Senior Member
Have you done a Roush dealer search?
The following users liked this post:
Alumiplati (09-12-2018)
#3
Junior Member
Thread Starter
I tried FiveStarFord, which I know is a roush dealer. they said they only do Ford Performance. I found a performance shop in Mckinney, and while they were super nice, they want $250 and my truck left there for at least a day. I don't really want to do that for a 15 minute job. Thanks for the response!
#4
Senior Member
The following users liked this post:
Alumiplati (09-12-2018)
#5
Junior Member
Thread Starter
Fort Worth is far from me. I am in the Mckinney/Melissa area. I will give them a call though. Thanks again.
I was really hoping to find someone local with a J2534 tool that I can pay with a case of beer or something. Happy to give a shop $100-$150 too though.
I was really hoping to find someone local with a J2534 tool that I can pay with a case of beer or something. Happy to give a shop $100-$150 too though.