When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Interesting new round switches Brett. Not for me but pretty cool.
Those switches are from OZNIUM. I don't stock those switches....just yet. Customers purchased them, then had them drop shipped to me to install for them.
(I may start stocking a few of them in the near future).
They're actually pretty cool for the guys who do want round switches and really look great.
I stock the KIC (Keep it Clean) switches shown in these pics:
__________________
Direct email: kustomfx.info@yahoo.com
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....
Here is mine.
Thanks Brett
I bought my own switches. 16mm Oznium Anti-Vandal switches
I ordered them through amazon with wiring already attached. Wired everything up and ran the wire through the driver side pilar.
Here is mine.
Thanks Brett
I bought my own switches. 16mm Oznium Anti-Vandal switches
I ordered them through amazon with wiring already attached. Wired everything up and ran the wire through the driver side pilar. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
I wonder if one could fit a couple of OTRATTW switches in a Horizontal/Vertical/Horizontal config?
The OTRATTW/Carling Technologies switches require a 2" tall panel in order to install in the Vertical position..... which definitely does not fit the mesh replacement switch panel or a 2015-2017 F150 with a Moonroof.
(Though it would fit a non power slider equipped truck... but space is still very limited.
If you have the power slider 2pc mesh console... theoretically only 2 OTRATTW/Carling switches could fit "Horizontal". It would Have to be at each end of the switch panel because the power rear slider switch housing takes up the middle space behind your mesh.
At this time,... though subject to change,.... I don't plan on making a switch panel to only hold 2 switches. Plus I'm not a fan of those type of switches mounted horizontal.... maybe it's just me & I should be more open minded... but the OTRATTW switches DEFINITELY look best in the vertical position. JMO.
But I'll ponder on that idea.... If I do, I don't expect to stock any rockers for the switches that I stock and any rockers for the switches could simply be custom ordered directly from Jim at OTRATTW. Again.... I'll have to really think on a 2 switch mesh panel that's made for only 2 "horizontal" Carling type of switches.
I'll keep the forum posted if I do.
Thanks,
Brett
__________________
Direct email: kustomfx.info@yahoo.com
2013 F150 5.0L, Lariat SuperCrew, KustomFX Switch panel, Rigid & PIAA lighting, LED bed lights, 6" BDS suspension lift, 35" Terra Grappler G2, 18x9 Fuel wheels...much more....
I own a 2016 that has the moon roof and rear slider. I would only want a plate with custom lettering to replace my mesh plate. I was wondering if you could put
FX6
OFF ROAD
I do not want any light holes. Just the black plate.
06-20-2017, 07:05 PM
