Pac- double din dash kit
05-30-2017, 12:21 PM
#1
Pac- double din dash kit
full disclosure of the blemishes with the unit. See picts below - when I installed this, I used 2 of the wrong screws that went to far and put small dimples in the face plate
It also made one of the mount posts become loose. I still installed it in my truck. the factory relocated camera buttons that go in that spot were binding. I thought it was due to the post. it was not. when I installed the new dash plate it did the same thing. if you do not tighten the screws evenly as well as snug, but not tight, it will bind. In hindsight I never use the camera buttons as they are automatic with my deck. to prep the kit forsale I used a sealer called Q-bond that makes the post stronger than new.
heres a pic of the post
These kits run 399 new, retailers will sell them 299. anyone who's looked knows they are hard to find. Im asking $120 firm shipped to the lower US. The wiring and hardware are still new sealed from manufacure
If you want the newer dash plate (mounted in my truck now) price is 200 shipped but would have to wait a couple days for me to find time to get it outta my truck and install the old one
Edit - pic shows the USB cable as a GM Chrysler kit - I called PAC when I got this and they assured me it works in our truck.. it does, it extends the usb from your new deck to the factory port on your dash
Last edited by Truckin; 05-30-2017 at 09:22 PM.
