SOLD...Lariat Climate bezel, FCIM for Sync conversion and climate control conversion
#2
Senior Member
I haven't done much searching on this. What else is needed to make this work? Is this a simple swap out (other than the cooled seat buttons not being functional, and I'm assuming the dual climate control)?
#3
Yes. All you have to do is swap yours over with this one and enable it in forscan. A 15 minute job. Dual zone and cooled seats will not work. Same temp on both passenger and drivers side. Setting a temp works and will adjust the fan speed for the desired temp.
Last edited by 2k12 FX2; 06-08-2017 at 05:32 PM.
#4
Senior Member
Does the heated seats work?
#6
Senior Member
Trending Topics
#8
Senior Member
iTrader: (1)
Heated seats will/do NOT work as there is a variance in the 2 different FCIMs. I promise you. I have been digging into this for awhile. The only way to enable heated seats on an XLT again that has it from the factory is to buy the heated/cooled seat module from a Lariat or higher, install and reflash with FORScan. You MUST replace the heated module with a heated/cooled module. There is something that is different that the new FCIM is looking for that is not present in the heated module. In the beginning I thought mine were working also, but they weren't. Take it FWIW to you but im telling you, i've been down this path.....
The following users liked this post:
lucas8888 (06-09-2017)
#9
I went out to check my heated seats now. I stand corrected. They do not work. My mistake. I thought I remembered messaging you goose, to ask about the functionality before I did the swap, and I thought you said yours worked, thats why I mentioned this. I edited my original post so there isn't any confusion.
Luke-
How come you didn't mention it in your for sale thread, when you sold yours?
Luke-
How come you didn't mention it in your for sale thread, when you sold yours?
Last edited by 2k12 FX2; 06-09-2017 at 01:31 PM.