4r75w Valve Body Opinion
#1
4r75w Valve Body Opinion
I finally solved my OD issue. At first I thought it was a valve body issue since I didn't replace it just rebuilt it when I had my tranny rebuilt originally. Since that wasn't the fix, I then replaced the 2-3 accumulator and HD spring along with the OD servo and replaced the OD servo pin with the upgraded Sonnax Pin again. This fixed my OD problem. The 2-3 accumulator was so worn out that it just fell out of the case .The new one was nice and tight. Apparently the builder didn't replace the accumulator when he built it. Anyways, now I have softer shifts and not the nice crisp shifts from my other valve body that was upgraded with the upgraded parts. Should I swap the valve bodies back out or leave everything alone?
#2
Mark
iTrader: (1)
my Edge crisped up my shift points very nicely...