2014 STX 5.0 misfire on cylinder 7
12-03-2018, 10:50 AM
#1
Junior Member
Thread Starter
Join Date: Dec 2018
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
2014 STX 5.0 misfire on cylinder 7
My '14 STX recently started acting up within the last couple weeks and I'm hoping someone here can give me some help on what's going on. I dont consider myself a mechanic by any means but I'm good with my hands and can do what I'm told. My pickup started giving a misfire on cylinder 7 code a few weeks ago and when im sitting at an idle my check engine light flashes. I've replaced all the plugs and coil packs and that didnt help. I want to take the fuel rail off and clean it and replace my injectors but have no idea where to start. If anyone is familiar with this model truck the rail sits right on top of the motor and it looks to only have 4 bolts holding it in place, 2 on each side. I cant find anything online about doing this job so I'm wanting to make sure that's all it is, the 4 bolts and whatever tool I need to disconnect the hoses. If anyone could steer me in the right direction it would be greatly appreciated. Thanks.
