Who is willing to Help?
#21
Senior Member
5' 10" for example is 5 feet not 5 yards. the ' mark = feet, the " equals inches. Rarely do people measure things in yards like they do elsewhere where they measure in meters.
You may find yourself with a bunch of unused inventory if you are making 30' decals for the F-150.
#22
Again I am very much thankful to your dedication. Once is done, you will get a 50% coupon code for me to buy whatever you like on our store.
Save
#23
Senior Member
iTrader: (2)
2016 Mustang:
Tape lay out from front
Side
Front closer
Measurement from body line. I spaced it one tape width (1.5")
Front area. I laid the tape following the body line and wheel arch.
Measurement to front fender from rear of door edge.
Measurement starting point with door handle
Tape lay out from front
Side
Front closer
Measurement from body line. I spaced it one tape width (1.5")
Front area. I laid the tape following the body line and wheel arch.
Measurement to front fender from rear of door edge.
Measurement starting point with door handle
#24
No offense but If you are going to sell something for the US market you should at least know a little about our culture and our history. That being how we measure things here, unlike the rest of the world.
5' 10" for example is 5 feet not 5 yards. the ' mark = feet, the " equals inches. Rarely do people measure things in yards like they do elsewhere where they measure in meters.
You may find yourself with a bunch of unused inventory if you are making 30' decals for the F-150.
5' 10" for example is 5 feet not 5 yards. the ' mark = feet, the " equals inches. Rarely do people measure things in yards like they do elsewhere where they measure in meters.
You may find yourself with a bunch of unused inventory if you are making 30' decals for the F-150.
out inventory is made to order, we don't have any inventory beside raw materials.
Again I appreciate it.
Save
The following users liked this post:
SteedaGT (07-27-2017)
#28
Senior Member
The following 2 users liked this post by tom231:
jupiteronearth (07-27-2017),
SteedaGT (07-27-2017)
The following users liked this post:
SteedaGT (07-27-2017)