What did you do to your truck today?
Member
Joined: Apr 2019
Posts: 71
Likes: 57
Is there some secret squirrel method for installing these pods without having to disassemble the front of the truck? I have some SS3 pods (pro) and keep putting this off since it looks like it is going to be a major PITA to try to install these things. Any pointers etc would be GREATLY appreciated. Too darn expensive to just be sitting on the shelf not being used.
Turn wheel OUT on the side you are working on.
Remove OEM adjuster screw. Then simply pry tab on one side to pop out half of the foglight and then pry on the other side and OEM foglight will come out.
Take your assembled DD SS3 and push it into the opening. You will hear click and its done. EASY!
Senior Member
Joined: Feb 2018
Posts: 948
Likes: 651
Member
Joined: Apr 2019
Posts: 71
Likes: 57
LOL. That is a loaded question.
Take it apart, Remove Needles, Remove two stepping motors, Remove 6 OEM Teal SMD LEDs, Retrofit 6 new Red LEDs, Depending if your needles are Blue or White, you will need to remove blue and paint with White. Reassemble. Enjoy.
Take it apart, Remove Needles, Remove two stepping motors, Remove 6 OEM Teal SMD LEDs, Retrofit 6 new Red LEDs, Depending if your needles are Blue or White, you will need to remove blue and paint with White. Reassemble. Enjoy.
Senior Member
Joined: Sep 2018
Posts: 636
Likes: 157
I was wondering the same thing, then just happened to see this thread. 
Senior Member
Joined: Sep 2018
Posts: 636
Likes: 157
Thanks for the reply, and the thread on the upgrade. I will check it out!
