When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Stocked the USB/storage area with cigars! Decent inexpensive brand I found a while back called "elephant butts". $2 a stick for a medium size (45 ring maybe) cigar Madura wrapper.
Go to Cigars International and try their 5 Vegas line. My fave is the double Corona classic. A box of 25 should run around $80 plus shipping. I pay for 2 day which IIRC is $16. I usually order 4 boxes at a time to make it worthwhile.
Had sport wheels put on. So much better than the 15-18 STX wheels. Now I just need to get the center caps in since the ones from my old wheels are too small.
I also installed a half width console vault. Now I can store my gun and still have some of the console to use at the same time.
I am so looking at those wheels! I want the black though and yes I am no fan of the STX wheel either. That looks awesome!
Switched from my 87 tow tune back to my 93 perf tune, for summer.
Yowzaa, forgot how hard the baby boost pulls on that set-up.....
Must be a lot of fun! I just had my 2017 STX custom tuned. With the mods my little 2.7l is now making 432 at the crank and 312 at the wheels. I just got 12 gallons of 100 octane yesterday and oh boy! Once Barona reopens it's running their ⅛th mile.
Its very sturdy. It's fairly thick steel with no flex. I got it for the same reason, I was just leaving my gun in the console with it locked when needed but that is easily defeated. I've had a gun stolen out of a truck before and don't want a repeat. I also didn't want to loose unsecure access to the entire console.
The install requires removing the rear cup holders, rear panel on the console (2x 7mm bolts), and the two rear 10mm bolts. You then lift the rear of the console up and slide a plate with nuts under. You then drop the safe into the console, drill 4 holes and screw into the bottom plate. I think on of my nuts fell off so I only have 3 bolts securing it.
Thanks for the reply. I hate removing anything in the interior because I feel like it never goes back together the same, but I really do like this design better than the full console vault. I'm going to sleep on it, but might have to pull the trigger on it tomorrow.
I took the trim off my original XL steering wheel and lightly sanded it and gave it a few coats of paint and some clearcoat. I haven't installed into my leather wheel though. Want the clearcoat to cure a bit more. Came out pretty nice. Not a pro paint job but it looks nice to me.
BTW, taking off the button clusters is easy. Just 4 torx screws holding them to the trim on the back side.
Must be a lot of fun! I just had my 2017 STX custom tuned. With the mods my little 2.7l is now making 432 at the crank and 312 at the wheels. I just got 12 gallons of 100 octane yesterday and oh boy! Once Barona reopens it's running their ⅛th mile.
How does the mileage part work? Do you have to tell him your mileage when you order it and then not drive until you get it? Or does it stay on the trucks computer, and then just pop up correct when the new one is plugged in?
You give him a pic of your current milage and hr . Add a little extra while you drive waiting for parts to come in. Might be iff a few.
I am so looking at those wheels! I want the black though and yes I am no fan of the STX wheel either. That looks awesome!
Thanks, I've been lusting after these wheels for two years and finally found a set for a steal. I wanted the black Ford performance version as well but I just don't believe in spending that much on wheels.
I will probably plastidip them black in a few weeks.
