When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I installed a Blackvue DR750S-2CH. You cannot see any part of the front camera when in the driver seat.
I ran the wiring along the headliner to behind the passenger rear seat. There, I will be installing the BlackVue B-124. I plan to hardwire this into the wiring leading to the inverter. It will tuck in nicely behind the jack. I will finish this off before work tomorrow.
Did the easy headlight mod and swapped from chrome XLT grill to a chrome Lariat grill. Not a lot of change I know but I prefer the new grill. Maybe someone else needs the old one! Old grill out! Well I say old, truck only has about 1200 miles on it! Went ahead and did the easy headlight mod while I had the grill out. I know you don’t have to pull the headlights out to change the bulbs, but this far along and it’s very easy to do at this point. Swapped the low beam H11 for H9, swapped the high beam 9005 for 9011 and put the high beam 9005s in the fog lights. New grill in and can’t wait to see the difference the new bulbs make. I did swap out 1 side and then turn them on for comparison (no photo unfortunately) but you can see a significant difference in the light output even in the day.
Finished the floor console and shift conversion today. It really seems like a different truck now. Many thanks to Firerunner and DeeMiniioon on their documentation in their thread.
While it was torn down I threw in some Dynamat.
Raptor carbon fiber shifter and sync 3 cubby door.
Wow, Mike that looks like a tremendous amount of work but the result is beautiful. I'll bet that sound deadening material makes a huge difference in noise reduction in the cab. Love that carbon fiber shifter too. Is that a Raptor take-off?
Finished the floor console and shift conversion today. It really seems like a different truck now. Many thanks to Firerunner and DeeMiniioon on their documentation in their thread.
While it was torn down I threw in some Dynamat.
Raptor carbon fiber shifter and sync 3 cubby door.
Mike
WOW I really like that interior, too bad couldn't get it in the Platinum, it looks very custom! Who made the covers?
Wow, Mike that looks like a tremendous amount of work but the result is beautiful. I'll bet that sound deadening material makes a huge difference in noise reduction in the cab. Love that carbon fiber shifter too. Is that a Raptor take-off?
Thanks! I've only driven a few miles but yes it does seem quieter and more isolated. Yes the shifter and cubby cover are both for a Raptor. The lighting wasn't so great in the pictures that were taken outdoors.
The color match looks spot on! My 14 was that color and I really enjoyed how bright and airy it felt. Looks good, even I would enjoy a RC with that interior.
09-22-2018, 01:28 PM
