I'm currently on 3.4.22110, for the voice and map files, am I able to just upgrade directly from 2.20 maps by building an install .lst file, similar to upgraded the application file? Thanks.

 

As been posted already

— New Sync 3 OS Released —
Package Name: NU5T-14G381-AA
Epoch: 1660780450000
Major Version: 3.4
Build: 22200
Build Date: 2022-19-07
Package Date: 2022-08-17
Release Date: 2022-08-24
List of Changed files: https://pastebin.com/5vRLth26
Visible Changes: Nothing
Changes (based on diff):
* Updated some ifs, some bins and some libs

Linked voice package:
5U5T-14G391-AT_1660763323000
5U5T-14G391-BS_1660772122000
5U5T-14G391-CS_1660783942000
5U5T-14G391-DS_??
5U5T-14G391-ES_1660786984000
5U5T-14G391-FT_1660787787000

Most important thing:
Does JB works? YES

 

I think corresponding voice file for NA is 5U5T-14G391-CS_1660783942000

 

Forgive my ignorance, but what exactly is "JB"? I don't see anything that explains this anywhere I've looked . . .

 

I dont know myself but my guess it is JailBreak.
I have asked, will post what they reply.

 

My Truck: 2016 Ford F150 Lariat 5.0L Super Crew

So I did the Cyan Lab Sync 3.0 to 3.4 update last night. Zero issues. Followed all the tips and tricks outlined in this thread.

This was my sequence:

1. I used the Ford Motor Company (My Ford dot com) website to confirm the OEM sync version they had on my VIN. It matched what I saw on my F150 screen. I had 3.0 Build 19205.

https://www.ford.com/support/sync-maps-updates/

2. I used the Ford Sync Update to go from 3.0 Build 19205 to 3.0 20204 mainly as a test to see if my truck was capable of accepting an update before I moved to the "big" update with Cyan labs. The 3.0 20204 update went perfectly:

https://i.ibb.co/bKwDdGK/syncupdate.jpg

After the Ford update, I uploaded the .xml file to Ford's website to update my VIN. The Ford update generates an XML file post-update that allows you to update your configuration at Ford.com. That's the file I updated. I found it on the USB drive after the Ford update finished. That worked too. My Ford now shows my VIN has 3.0 20204 build.

3. Once I confirmed that Sync was running ok with 3.0 20204 I decided to try the Cyan Labs update. The Cyan Labs build I used was: Syn3 Updater 2.11.4.0 I used a new 64GB USB stick that I purchased locally. I selected
Region: United States, Canada, & Mexico.
Version: 3.4.22200
Map Version: 2.21 (2021) - NA

At bottom of screen Install mode was: reformat, Forced - No MY20 Protection - Auto-Detect
I clicked start and the build process started, and took about 30 minutes over a wired home internet connection. Once the build was finished I moved to the truck with the USB fob.

4. For the truck install, I started by doing a Master reset on the system. Waited for it to come back up and checked to make sure no phone was attached and that all features were working. I then turned the truck off (engine off), exited the vehicle and left it alone for about 15 mins.
5. 15 mins later I came back to the truck, opened it, inserted the Cyan Labs generated USB fob in the USB receptacle under the center dash, and then started the truck. Closed the doors and waited.
6. A minute or so after the truck started, I saw "Update in progress" (or a similar message) and it appeared the update was running. I kept the engine running and stayed in the truck the entire time while the update loaded. I saw the Sync screen cycle between the horse (mustang) image and the mustang (car image) as the progress bar below move from 1% to the right in increments.
7. I didn't time the update, but my guess is it took about 30-35 minutes. At the end I got a message that the update was complete and to remove the USB fob. Which I did.
8. I turned the truck off, exited it, and locked it. Waited about 10 mins and then re-entered, started truck and the new Sync 3.4 loaded. Everything seemed to work except for a message at the beginning that said "USB hubs not supported". But the message auto disappears a minute or so after starting so I didn't troubleshoot that. No issue for me.9. I checked Sync and all appears to be working. The new interface is amazing! And Voice Commands via the steering wheel button now work! Voice commands never worked before, and now it does. My Nav maps updated from 2014 to 2021. Huge improvement in Nav Maps.

Overall I am very happy with the update.

Sync 3.0 20204 start:

https://i.ibb.co/MnB0HS6/SYNC30.jpg

Start of Cyan Lab Update from 3.0 to 3.4:

https://i.ibb.co/ZzyGs31/CYANLABUPDATE.jpg

Finish. Sync 3.4 installed:

https://i.ibb.co/yhh7QL2/SYNC34-FINISH.jpg

Photo showing software update screen and new update Nav Maps (Feb 2021)

https://i.ibb.co/XXDwbTG/UPDATEDSYNCMAPS.jpg

 

Yep, jailbreak. The Fmods.net website has details.

 

Seems like alot of work. I used Cyanlabs.

 

Not sure who you are targeting with your comment . . . lots of people on this thread have indeed used Cyanlabs . . .

 

Good for you, too bad this thread isn't about Cyan. How about creating a thread just for them?