16XLT

Dang good pricing! Lucky!

Ecodude

Can anyone help me find the can bus connections I need to tap into pins 16 and 17 on the apim? I think that's all I need and I'm good to go

dansky78

Did you ever figure this out?
I am in the same boat. I have everything complete, except I don't know where to tap in the can bus.

antho

I would highly recommend studying this thread. All the info and diagrams needed are here.

http://www.mustang6g.com/forums/showthread.php?t=31286

antho

Pin 4&5 are the can bus. They are in the plug going to the bezel. Tap "don't cut" them. Add the wpt-100 via 3 way splice to them and swing them to the APIM pins.

Ecodude

I tapped into the gpsm connector.



Pins 2/3

TheX

This kind of thread is why this place rocks.

dansky78

This was the money shot! Thank you, Thank you!

Ecodude

I finally got everything dialed in. Works great and I owe a HUGE thanks to Jesse from oemradio solutions!! For some reason my entertainment icon was saying entertainment unavailable and I couldn't change the radio station. So I hit up oemradiosolutions to see if he's heard of the issue before. He said he had but didn't know the reason for it and told me to send it to him and he would take a look. It took 3 days for him to get the apim and ACM but the day it arrived he immediately troubleshot everything and called me to tell me what's going on. After about 2 hours of diagnosing and fixing the issue he already had the stuff shipped back to me! I got the packaged 2 days later (which was packaged better then I packaged it btw) plugged everything in and problem soved!!

I Highly recommend contacting Jesse from oemradiosolutions@gmail.com for anything about upgrading to the 8" mft or sync. He helped me even though I didn't buy a whole kit from him which says a lot about his professionalism and how cool of a guy he is!

facepalm

Antho, was the ACM necessary? Obvioulsy the APIM and screen are needed, but I'm wondering if it is different than the one installed in my truck already?