Tire sizing +1 Offset
Thread Starter
Senior Member
Joined: Jan 2011
Posts: 186
Likes: 19
From: Long Island
Tire sizing +1 Offset
Hey Guys,
So i'm looking at getting a new wheel and tire set up, Below is what i am looking at:
2016 F150 FX4 Lithium Gray Crew
20x9 +1 offset Fuel Mavericks
Bilstein 5100 Level probably will set it at 2.1" (also swapping rears as well)
Toyo AT2 Xtreme - 305/55R20 or 295/60R20
I've searched this forum as well as many other sites and i'm looking for others experiences/opinions on the tires. The majority of people i see are running the 305's and i saw maybe two or three on Custom Offsets running the 295's and a few members of this site. I like the taller wheel but I would like to keep the crash bars, wouldn't mind having to bend them a half inch or so.
I'm pretty much set on pulling the trigger on the 305's, i want the tire to sit roughly an inch or less outside the fender but also would like the wheel well to look pretty full. I know due to crash bars and the +1 offset its hard to have both but id like to see if anyone else has some pictures or specs on their set ups before i pull the trigger.
Appreciate any help
So i'm looking at getting a new wheel and tire set up, Below is what i am looking at:
2016 F150 FX4 Lithium Gray Crew
20x9 +1 offset Fuel Mavericks
Bilstein 5100 Level probably will set it at 2.1" (also swapping rears as well)
Toyo AT2 Xtreme - 305/55R20 or 295/60R20
I've searched this forum as well as many other sites and i'm looking for others experiences/opinions on the tires. The majority of people i see are running the 305's and i saw maybe two or three on Custom Offsets running the 295's and a few members of this site. I like the taller wheel but I would like to keep the crash bars, wouldn't mind having to bend them a half inch or so.
I'm pretty much set on pulling the trigger on the 305's, i want the tire to sit roughly an inch or less outside the fender but also would like the wheel well to look pretty full. I know due to crash bars and the +1 offset its hard to have both but id like to see if anyone else has some pictures or specs on their set ups before i pull the trigger.
Appreciate any help
Member
Joined: Jul 2018
Posts: 90
Likes: 28
From: CO
It will be close. I have bilsteins set at 2.1, 305/55/20 (KO2's) and 20x9 +18 and the side wall sticks out about half an inch, none of the actual tread though. Your total exposed will be about 1.5 inches would be my guess. Mine clear by an inch or so, hence why it will be close.
