Tailgate Marker lights
#131
Left turn signal lights up first three on left and middle the opposite for the right, brakes strobe and not just flash
#132
#133
I ordered the GM lights (with the updated part number) and was going to install them. But I’m wondering which way is up and which way is down. One edge of the lights is completely flat. The light curves around on the front and then is flat all the way to the back. The other side is more curved. Does anyone know which is up and which is down? Should the completely flat be facing down or up?
#134
Village Sociopath
iTrader: (1)
Join Date: Jun 2014
Location: Nowhereville Barton City Michigan
Posts: 28,512
Received 10,047 Likes
on
6,496 Posts
Not sure what is up, or down. I mounted mine so the pigtail would be closest to the camera feed through.
The following users liked this post:
gwise06 (04-16-2022)
#135
Master Member
#136
#137
#138
Yes, but has not affected any systems or warning as they did with my 15'
#139
Senior Member
Finally got mine installed. Chevy part on Ford Truck.....tapped the license plate wire and ran a terminal to the ground bolt for ground.
Last edited by asdaven; 03-29-2018 at 10:53 PM.
The following 2 users liked this post by asdaven:
gwise06 (01-23-2022),
johnday in BFE (04-22-2018)
#140
Senior Member
Haven't installed on the truck yet. I used the Ford Super Duty marker light bar, cut a slot in the top of the bumper step pad and recessed the whole bar so the bottom of the 3 lights meets the top of the step pad. Looks like clearance between the marker light bar and the tailgate will be tight, but I'm hopeful it will clear.