Syppo Mirrors
#121
Member
So I got my mirrors on and installed. So far quite happy with them. Was quite a cold install. -20C with a -35C windchill. Haha.
I like how the signal lights work even though my stock mirrors didn't have that option.
Has anyone figured out how to get the running lights going on these?
#122
Senior Member
If you have the 8 pin plug there are no running lights.
#124
Senior Member
Looks really good. Was it hard to remove the cover from the inside of the door to expose the bolts etc.
#126
The triangular cover pops straight off. There are three bolts per side and they're readily accessible with the cover off. You'll spend less than 5 minutes per side to swap the mirrors without needing any specialty tools.
The following users liked this post:
StevieB (01-15-2017)
The following users liked this post:
StevieB (01-15-2017)
#128
Member
+1 on the two nuts and two bolts. 10mm socket should do the trick. I used a wrench for the nuts and a socket with an extension for the bolts.
Also, I dug back into the archives I had from my old 2012 power wagon and I found the write up a guy had to turn the signal lights on his Dodge tow mirrors into running lights/signal lights. I'm sure it'll be similar. Is anyone interested in me sending it and then they can try it?
I even have a rough wiring diagram for it.
I'd do it myself but I don't have a shop to do it in and winter here is cold... See the temps I had to install my mirrors in. Haha.
Also, I dug back into the archives I had from my old 2012 power wagon and I found the write up a guy had to turn the signal lights on his Dodge tow mirrors into running lights/signal lights. I'm sure it'll be similar. Is anyone interested in me sending it and then they can try it?
I even have a rough wiring diagram for it.
I'd do it myself but I don't have a shop to do it in and winter here is cold... See the temps I had to install my mirrors in. Haha.
#129
Senior Member
Thanks, I am just waiting for the weather here to get a bit better and with the recent knee replacement its hard to be on the feet for any time right now. Appreciate all the input. The mirrors look nice.
#130
Gold member
So I got my mirrors on and installed. So far quite happy with them. Was quite a cold install. -20C with a -35C windchill. Haha.
I like how the signal lights work even though my stock mirrors didn't have that option.
Has anyone figured out how to get the running lights going on these?