Swap F150 platinum door sills with F350 platinum illuminated door sills?
#31
Nice mod... I wonder if they have an illuminated version for the Lariat?
That said, a little tough love. I would suggest improving your wiring a bit. Phone wire splices definitely aren't designed for what you're doing, and you've got conductor exposed. You really don't want to end up chasing some weird electrical issues thanks to an errant connection.
That said, a little tough love. I would suggest improving your wiring a bit. Phone wire splices definitely aren't designed for what you're doing, and you've got conductor exposed. You really don't want to end up chasing some weird electrical issues thanks to an errant connection.
I am looking to do this mod, I just ordered them. However what kind of wire taps are you guys using? I am looking at getting the pigtails WPT-984 as well.
#32
Senior Member
iTrader: (7)
Posi-taps connectors are good. It would pierce the hot wire when door is open and closed in the wire loom under sill plate and strip the end of the hot wire that's on the lighted sill plate and insert into posi and screw tight and repeat for ground and finished. Doesn't damage the trucks wires if you decide to remove. Just an idea. Just realized about the pigtails with connectors.I assume you will just need the Posi- tap butt connector. I don't know what Ford supplies on lighted sills, whether it's one connector or seperate wires and if you have the OEM connector in the sill wiring loom.
Last edited by tinner1; 11-08-2018 at 01:42 PM. Reason: add
#36
Posi-taps connectors are good. It would pierce the hot wire when door is open and closed in the wire loom under sill plate and strip the end of the hot wire that's on the lighted sill plate and insert into posi and screw tight and repeat for ground and finished. Doesn't damage the trucks wires if you decide to remove. Just an idea. Just realized about the pigtails with connectors.I assume you will just need the Posi- tap butt connector. I don't know what Ford supplies on lighted sills, whether it's one connector or seperate wires and if you have the OEM connector in the sill wiring loom.
#39
Okay, Im guessing you purchased two pig tails for each side. They are running about 35-40 a piece?