Show me your Leveled trucks with OEM rims!
#812
Width of tire is almost more of a problem than height. I m in the same predicament as you with Those stock rims n tires. A good resource for tire sizes is included below. Most people seem to fit 33" tires with no lift or leveling kit. But if you're trying to go with one of those 12.5" wide tires it will rub. I myself am going to do somewhere between 2.25-3" coilover leveling with 285/75/18 tires to keep the stock rims (still fit near 35" tires) which are only 7.5" wide so 12.5" tires wouldn't fit. The 285 comes in at like 11.3" which is about the widest recommended tire on stock 18" rims. Tire selection changes with different sizes though, so if you have a model or tire brand loyalty in mind look there first.
http://www.crawlpedia.com/tire_size_converter.htm
http://www.crawlpedia.com/tire_size_converter.htm
Im going to to do 2" RC leveling kit and considering the General Grabber AT2 in 265/70R18. I think that will give the look I'm going for.
The following users liked this post:
Hwy98 Survivor (12-18-2016)
#813
The following users liked this post:
Hwy98 Survivor (12-18-2016)
#814
Driving like I stole it
Has anyone just taken the factory blocks out of the rear on a 4x4?
I'm not doing any off-roading or adding bigger tires, so it seems like that's the best option for leveling for my needs.
I'm not doing any off-roading or adding bigger tires, so it seems like that's the best option for leveling for my needs.
#816
Mike
The following users liked this post:
Boosted_BlueFlame (12-19-2016)
#817
Member
Thanks brother I appreciate it! I originally ordered 295/60r20 ridge grapplers but the shop messed up and ordered these but they discounted the price so I decided to keep em. They are a little too wide for an 8.5 wide wheel but it's growing on me.
The following users liked this post:
MikeN77386 (12-20-2016)
The following users liked this post:
Boosted_BlueFlame (12-19-2016)
#819
The following users liked this post:
Boosted_BlueFlame (12-19-2016)
The following users liked this post:
LANDON21AND1 (12-20-2016)