Reversing A.S.S. switch function
#11
Always glad to hear that people are actively working to reverse these factory defects. I will probably just Forscan mine off in the future.
#12
Senior Member
Thread Starter
I now have this switch working as default to power on when the truck is started. Using a Auto S/S switch with the "OFF" led light as a reminder that it has been turned off, when I do. Using the ignition switch wire as a trigger (thanks to @TexasFording ), which is a 12V+ pulse that is converted to a momentary ground using a SPDT relay. This sends the initial ground pulse to power up without needing a button push.
I blacked out the auto start symbol and will come up with a way to label the switch cover later. I have attached a video of the switch operation. It is used for the front sensor system, which has an audible tone when powered up
I blacked out the auto start symbol and will come up with a way to label the switch cover later. I have attached a video of the switch operation. It is used for the front sensor system, which has an audible tone when powered up
The following users liked this post:
carrierj (02-04-2018)