Retrofit Power Fold Tow Mirrors to XLT
#301
Thanks again.
#302
My contribution...
Trailer Tow Mirrors
Trailer Tow Mirrors
- XLT Trailer Tow mirror---FL3Z 17682 AC and FL3Z 17683 AC - Power mirrors w/black skull caps includes: power adjust/heat/signals/with manual fold/extend/without BLIS, memory, auto dimming (driver’s side only) or side camera
- Lariat (500A) Trailer Tow mirror---FL3Z 17682 AD and FL3Z 17683 AD Power mirrors with black skull caps includes: power adjust/heat/signals/power fold & extend/memory/auto dimming (driver’s side only)/without BLIS or side camera
- Lariat (500A) Trailer Tow mirror---FL3Z 17682 AE and FL3Z 17683 AE Power mirrors with chrome skull caps includes: power adjust/heat/signals/power fold & extend/memory/auto dimming (driver’s side only)/without BLIS or side camera
- Lariat (501A & 502A) Trailer Tow mirror---FL3Z 17682 AF and FL3Z 17683 AF Power mirrors with black skull caps includes: power adjust/heat/signals/power fold & extend/memory/auto dimming (driver’s side only)/with BLIS/without side camera
- Lariat (501A & 502A) Trailer Tow mirror---FL3Z 17682 AG and FL3Z 17683 AG Power mirrors with chrome skull caps includes: power adjust/heat/signals/power fold & extend/memory/auto dimming (driver’s side only)/with BLIS/without side camera
- Lariat (501A & 502A) Trailer Tow mirror---FL3Z 17682 AH and FL3Z 17683 AH Power mirrors with black skull caps includes: power adjust/heat/signals/power fold & extend/memory/auto dimming (driver’s side only)/with BLIS and side camera
- Lariat (501A & 502A) Trailer Tow mirror---FL3Z 17682 AJ and FL3Z 17683 AJ Power mirrors with chrome skull caps includes: power adjust/heat/signals/power fold & extend/memory/auto dimming (driver’s side only)/with BLIS and side camera
- Lariat harness 22 pin, FL3Z-14631-A and FL3Z-14630-E (supports Power fold, power telescope & memory). Requires modification (4 terminals must be repinned) of 8 pin connector (C541) to 4 pin connector (C505) for LH front door lock switch without memory.
- XLT harness 22 pin, FL3Z-14631-F and FL3Z-14630-C (does NOT support Power fold, power telescope or memory)
- With BLIS--DG9Z 14B291 VJ and DG9Z 14B291 VK
- Without BLIS --DG9Z 14B291 VL and DG9Z 14B291 WK
- Power fold only---- FL3Z 14529 CA
- Power fold and extend---- FL3Z 14529 BA
- Switch----FL3Z 13D730 EA
- Processor (module)---FU5Z 13C788 A – Requires a $50 core deposit
- Dash vent trim which holds spotlight switch----FL3Z 1504339 DB
- DU2Z-14474-BA (WT-1001) Terminal – C265 Female Connector (RH Side of14A005 Cab Harness – Engine Harness End)
- DU2Z-14474-CA (WT-1002) Terminal – C510 & C610 Female Connector (LH & RH side of 14A005 Cab Harness – Door Harness End)
- BU5T-14421-HA Terminal - C268 Male Connector (LH Side of 14A005 Cab Harness – Engine Harness End). This terminal is NOT serviced through Ford Parts. However this terminal can be salvaged from either of the 8 pin XLT door harnesses (C510 connector - pin A8 or A11, or C610 connector - pin A11 or A21). Suggest using 3U2Z-14A088-AB (WT-56814) 18-22 AWG terminal (splice kit) to connect salvaged terminals to additional wiring – see below.
- Belden (NAPA) 785105 20 AWG Green Primary Wire (Extend Function)
- Belden (NAPA) 785109 20 AWG White Primary Wire (Retract Function)
Last edited by tmcolegr; 09-02-2016 at 05:14 AM.
The following 7 users liked this post by tmcolegr:
16XLT (08-31-2016),
2016BoostedGreyGoose (08-31-2016),
BStrummin (09-07-2016),
coldb (05-06-2018),
F150kang (08-31-2016),
and 2 others liked this post.
#303
Door Module Reprogramming
Last edited by tmcolegr; 08-31-2016 at 02:19 PM.
The following 4 users liked this post by tmcolegr:
#305
The FORScan Guy
#306
#307
As I mentioned in one of my previous posts, my dealer swears they can reprogram the existing modules - no need to replace. Guess we will find out.
#309
Lariat LH door harness - 8 pin connector (C541) to 4 pin connector (C505) door lock switch modification
Last edited by tmcolegr; 08-31-2016 at 08:09 PM.
The following 2 users liked this post by tmcolegr:
FreeAirHead (09-07-2016),
SycoCell (11-17-2016)