Retrofit 2017 F-250 Aux Switch Panel in F-150
#642
Senior Member
1: 20" LED light bar
2: Set of Hella Rallye 4000s lights
3: Auxiliary reverse lights
4: Not used (maybe another light bar some day)
5: Ignition override for an auxiliary power circuit (Second battery, HAM radio, inverter, etc.)
6: Auxiliary hazard lights/strobes
2: Set of Hella Rallye 4000s lights
3: Auxiliary reverse lights
4: Not used (maybe another light bar some day)
5: Ignition override for an auxiliary power circuit (Second battery, HAM radio, inverter, etc.)
6: Auxiliary hazard lights/strobes
#643
So I've got everything order, and I got an email from Tasca saying WPT-1125 is out of stock and they aren't looking at getting it in until around mid May. Making a pigtail is an option, but I've also read/seen part number AU2Z-14S411-AMA which is the same price as WPT-1125. Could anyone verify that it's essentially the same exact part just a different part number?
#644
You could just skip the pigtail and order the following and have a nicer outcome:
Originally Posted by starliner57
I got mine at digikey Ford/Motorcraft use a Molex MX150 series connector. You will need Digikey part number WM13161-ND 12 position connector $3.08ea. and WM3692CT-ND pin $1.39 for 10ea. much cheaper than the WPT-1125.
Originally Posted by starliner57
I got mine at digikey Ford/Motorcraft use a Molex MX150 series connector. You will need Digikey part number WM13161-ND 12 position connector $3.08ea. and WM3692CT-ND pin $1.39 for 10ea. much cheaper than the WPT-1125.
The following users liked this post:
ThatTruck (04-27-2018)
#645
Senior Member
So I've got everything order, and I got an email from Tasca saying WPT-1125 is out of stock and they aren't looking at getting it in until around mid May. Making a pigtail is an option, but I've also read/seen part number AU2Z-14S411-AMA which is the same price as WPT-1125. Could anyone verify that it's essentially the same exact part just a different part number?
The following users liked this post:
ThatTruck (04-27-2018)
#647
Looking at all of these pics and part numbers and all... I've come to the realization this is not easily doable in a regular cab... Has anyone seen upfitter switches in a regular cab XL superduty? I can configure them on the Ford website (and the pic shows that console) but if it is that, then the headliner is different... here's what my XL reg cab looks like:
Seems like you would need the contoured headliner first, and then from there you can work on the upfitter switches.
#648
Senior Member
I haven't done the swap, but I did stan up through the sunroof in my truck and noticed that the headliner is held up there by magnets. Yeah! rare earth magnets on little steel tabs mounted under the aluminum roof. I was surprised.
The following users liked this post:
bambbrose (04-27-2018)
#649
I would need, assuming the harness plug is there:
-headliner
-the overhead console w/:
-gray color
-no rear sliding window
-no sunroof
not sure this part even exists from the F-250s
#650
i ordered wpt-1125 from ebay.
So I've got everything order, and I got an email from Tasca saying WPT-1125 is out of stock and they aren't looking at getting it in until around mid May. Making a pigtail is an option, but I've also read/seen part number AU2Z-14S411-AMA which is the same price as WPT-1125. Could anyone verify that it's essentially the same exact part just a different part number?