removing grill (pics pics pics)
#1
Member
Thread Starter
removing grill (pics pics pics)
Ok guys this is how I went about it , I will correct my self as i go saving you time if you are interested in taking of your grill to swap/paint and I'm sure can be used to help remove headlights ( next project retrofit!)
You will not only remove the first side pin , but all three connecting the insulation wrap to the bumper , there are 4 10mm bolts you will remove across the top
Here was my first mistake .. you can wait to remove the push pins, till you remove the whole assembly of what seems like blinds to shield the intercooler/radiator.
After using a 7mm socket to take off fender headlight filler bolts your can snap it out.. exposing the side 8mm bolts that will remove the assembly , don't forget to disconnect wiring before pulling it out
Now that the assembly is off it should by easy to remove push pins and the four 10mm bolts that help place grill on the blind assembly
Place new grill back on to assembly with push pins and four gold 10mm bolts
Place assembly back and reverse steps hope this helps you all out !
You will not only remove the first side pin , but all three connecting the insulation wrap to the bumper , there are 4 10mm bolts you will remove across the top
Here was my first mistake .. you can wait to remove the push pins, till you remove the whole assembly of what seems like blinds to shield the intercooler/radiator.
After using a 7mm socket to take off fender headlight filler bolts your can snap it out.. exposing the side 8mm bolts that will remove the assembly , don't forget to disconnect wiring before pulling it out
Now that the assembly is off it should by easy to remove push pins and the four 10mm bolts that help place grill on the blind assembly
Place new grill back on to assembly with push pins and four gold 10mm bolts
Place assembly back and reverse steps hope this helps you all out !
The following 27 users liked this post by SILVERBACK_PAT:
02fx4dude (07-31-2015),
abnsgt (05-11-2016),
car_doper (09-17-2016),
catmatton (05-27-2016),
chuckcasey (09-10-2016),
and 22 others liked this post.
The following 4 users liked this post by SILVERBACK_PAT:
#5
Curmudgeon In Training
iTrader: (1)
Where were you last weekend?? Excellent write up and pics. Same thing I found out through trial and error last Sunday. Looks like you swapped an XLT grille for a Lariat Sport grille. Did the emblems mount in different ways? I didn't have the 3 10mm nuts on the emblem on my Lariat Sport grille. Your truck looks great.
#6
Senior Member
#7
Member
Thread Starter
Where were you last weekend?? Excellent write up and pics. Same thing I found out through trial and error last Sunday. Looks like you swapped an XLT grille for a Lariat Sport grille. Did the emblems mount in different ways? I didn't have the 3 10mm nuts on the emblem on my Lariat Sport grille. Your truck looks great.
Haha sorry yesterday was my day off and project time ! Yeah I swapped the xl for the lariat , and nope it mounted on the same way and thanks .. did u get the emblem off ? What are you planning to do ..
Trending Topics
#9
Member
Thread Starter
removing grill (pics pics pics)
man . I have made some nasty messes with that plasti dip stuff... I learned my lesson and staying far away from that stuff.. got any pics ?