Remove 4X4/FX4 Sticker
#1
Remove 4X4/FX4 Sticker
Has anyone removed the sticker on the bed? Pictures? I kept it on my last truck but always though a sticker took away from the rest of the truck. 50K and a sticker?
#2
Flaccid Member
I might have photos in my build thread (see link in signature). I removed the FX4 sticker from the passenger side, but not the driver side, because I'm not committed to the idea. I might buy a replacement.
The following users liked this post:
gmcleer (12-26-2016)
#4
Senior Member
Took mine off.
Last edited by Sgb020; 12-26-2016 at 10:27 AM.
#5
Gone Golfin
iTrader: (3)
Left mine on for the 1st year. Wish I'd have left them on now and I'm a no badge/sticker freak. I would think it depends on the color combo as well as some look better than others.
Either way they come off easily.
Either way they come off easily.
#7
Senior Member
I just used my fingernail and pulled it off slowly. That's what I have done with all my trucks. I did pull it off in the summer so it was hot. May want to heat it up with a hair dryer or heat gun.
Trending Topics
#8
No fart cans allowed
Heat the sticker up with a blow dryer and start peeling it off from a sharp edge/end. Keep the heat on the leading edge where it is peeling off. As it heats up the adhesive softens and the sticker peels off easily. You can remove any adhesive from the paint with naptha, which is better known as lighter fluid. I have never used it but have seen people post that WD40 also will remove the residue.
Last edited by BadAV; 12-26-2016 at 12:25 PM.
#9
Senior Member
iTrader: (1)
Didn't like the way the red in the FX4 clashes with the Ruby Red so I removed them. I just peeled them off and then used some Goof Off to remove any residue. Freaked out a bit afterwards when I googled its use on auto paint and read some horror stories so quickly went and did a hand wash but all was well. A citrus based cleaner like Goo Gone may be better. With some light heat you should only have the slightest residue to remove wnyaway.
I'm considering replacing them with some grey & black carbon fiber style FX4 stickers....
I'm considering replacing them with some grey & black carbon fiber style FX4 stickers....
Last edited by mwardncsu; 12-26-2016 at 12:57 PM.
#10
Super Moderator
I don't like the red FX4 decal....
So I'm changing it to blue...
Also adding these emblems to the doors & tailgate.
Might do it tonight , will post pics when its done.
So I'm changing it to blue...
Also adding these emblems to the doors & tailgate.
Might do it tonight , will post pics when its done.