Raptor shift Paddles on non-Raptor write-up
#501
Senior Member
I have ordered my wheel from AutoNation Ford White Bear Lake and I received my harness from BGG. I opened the packaged and thought wow that is it? And I mean that in a good way. Boosted has done an awesome job of making a simple factory looking harness with very detailed easy to follow instructions. For a little over $400 I will have a working raptor wheel installed very soon. I fully admit that I am a qualified former mechanic, but this is a very simple install. If you are on the fence go for it. I guarantee you will be able to do it if you can turn a screwdriver. If you have any troubles this forum is here to help. And worse case if you absolutely decide it is not for you, I am positive you will be able to sell the parts here and get your money back.
Big thank you to all that made this happen!
Big thank you to all that made this happen!
The following users liked this post:
2016BoostedGreyGoose (07-22-2017)
#502
Gone Golfin
iTrader: (3)
I have ordered my wheel from AutoNation Ford White Bear Lake and I received my harness from BGG. I opened the packaged and thought wow that is it? And I mean that in a good way. Boosted has done an awesome job of making a simple factory looking harness with very detailed easy to follow instructions. For a little over $400 I will have a working raptor wheel installed very soon. I fully admit that I am a qualified former mechanic, but this is a very simple install. If you are on the fence go for it. I guarantee you will be able to do it if you can turn a screwdriver. If you have any troubles this forum is here to help. And worse case if you absolutely decide it is not for you, I am positive you will be able to sell the parts here and get your money back.
Big thank you to all that made this happen!
Big thank you to all that made this happen!
The following 2 users liked this post by idrive:
2016BoostedGreyGoose (07-22-2017),
Apples (07-22-2017)
The following users liked this post:
Apples (07-22-2017)
#505
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,264 Likes
on
2,183 Posts
The following 2 users liked this post by Firerunner:
2016BoostedGreyGoose (07-23-2017),
lucas8888 (07-23-2017)
#506
Junior Member
If you didn't have it before then that's an entirely different tutorial - check out @lucas8888's work HERE (& don't forget to give him a Paypal donation for all of his hard work )
Thank you for that info I am about to purchase the 2018 so that will help me with a handful of mods ive already got planned
#507
Senior Member
I just finished wiring mine up, the wheel should be here this week. It took me longer to figure out the size tool to remove the 3 screws that hold the steering wheel housing cover on, than to run and solder the wires. FYI it is a 5.5 mm socket or nut driver. I started up the truck and the column shift buttons still work, so I think I am wired up correctly.
#508
Has anyone done this recently and taken pictures of how you routed the cable and soldered the connections? I know it's one of those things that can be done a number of ways, but I wouldn't mind modeling after a "professional" type install. Thanks.
The following users liked this post:
Apples (07-27-2017)
#510
The following users liked this post:
2016BoostedGreyGoose (07-24-2017)