Raptor shift Paddles on non-Raptor write-up
#1103
#1106
'19 Lariat 3.5
Installed on my 2019 Lariat Special Edition. Only issue I had with the install/instructions- there was no way my arm would fit into the console to pass the wires forward to get it up around the knee panel to the steering wheel. My front storage bin with the 2 USB ports wouldn't come out without removing more of the radio stack, so instead I used an electrician's wire fish tape. Fed the tape in from the console, up to that area where I could reach in from the drivers knee panel and grab it, tied fly fishing line to the tip, pulled the tape back through the console, tied the pinned end of the harness to the fly line and then pulled it through.
The following 2 users liked this post by Gopherboy128:
2016BoostedGreyGoose (05-18-2019),
Max91 (05-05-2019)
#1107
Mine is done!
Thanx again Lawrence!
Thanx again Lawrence!
The following users liked this post:
2016BoostedGreyGoose (05-06-2019)
#1108
Senior Member
Thanks to 2016BoostedGreyGoose I now have a raptor steering wheel installed with working paddles! Disassembly of the console, center stack, etc wasn't the easiest, but the wiring harness he provided was unbelievably perfect. Exact OEM components and quality and perfect fit. There is no way a dealer would even be able to tell the modification had happened.
The following users liked this post:
2016BoostedGreyGoose (05-19-2019)
#1109
Sooooo, bought my 2018 recently and the Raptor Steering wheel was already installed. Unfortunately they didn't know about this thread and the paddle shifters weren't hooked up nor were the controls in the lower right hand side of the wheel changed out (still has the mode buttons, etc.)...
Of course I don't have the stock wheel to swap out the buttons. Anybody got a part number for any assistance for me? BoostedGrayGoose, what's the quickest way I can get your harness and some instructions, lol. I definitely want the paddle shifters working more than anything else (even though I never use them in my actual Raptor), so any help would be greatly appreciated.
Of course I don't have the stock wheel to swap out the buttons. Anybody got a part number for any assistance for me? BoostedGrayGoose, what's the quickest way I can get your harness and some instructions, lol. I definitely want the paddle shifters working more than anything else (even though I never use them in my actual Raptor), so any help would be greatly appreciated.
The following users liked this post:
2016BoostedGreyGoose (05-23-2019)
#1110
Send him a PM with you email add.
Yeah I didn't think I would use the paddles either. Turns out I do. whenever I'm in low speed zones or heavy traffic I can delete gears in "D" mode. I don't see having 6 speeds in a school zone.
Good luck!
Yeah I didn't think I would use the paddles either. Turns out I do. whenever I'm in low speed zones or heavy traffic I can delete gears in "D" mode. I don't see having 6 speeds in a school zone.
Good luck!
The following users liked this post:
2016BoostedGreyGoose (05-23-2019)