Raptor Door Sills Are Finally Here!
03-23-2017, 01:20 PM
#31
Senior Member
Thread Starter
03-29-2017, 05:15 AM
#34
Senior Member
Thread Starter
Edit: the glove box and the driver side knee panel are very easy to change out if you want to replace them with black panels and it won't break the bank.
Last edited by gbk; 03-29-2017 at 05:17 AM.
03-29-2017, 05:33 AM
#35
I got nothing
I have the sills but am waiting on trim to fill the void between the metal insert and the main plastic body
I am looking into changing the a and b pillars upper panels , glove box , drivers knee bolster. I think this would eliminate enough of the gray at eye level.
The sills look look great in our trucks. They are all performance vehicles to an extent.
I am looking into changing the a and b pillars upper panels , glove box , drivers knee bolster. I think this would eliminate enough of the gray at eye level.
The sills look look great in our trucks. They are all performance vehicles to an extent.
03-29-2017, 05:17 PM
#38
Senior Member
Thread Starter
I have the sills but am waiting on trim to fill the void between the metal insert and the main plastic body
I am looking into changing the a and b pillars upper panels , glove box , drivers knee bolster. I think this would eliminate enough of the gray at eye level.
The sills look look great in our trucks. They are all performance vehicles to an extent.
I am looking into changing the a and b pillars upper panels , glove box , drivers knee bolster. I think this would eliminate enough of the gray at eye level.
The sills look look great in our trucks. They are all performance vehicles to an extent.
I take that back. I only did the A pillars. Maybe if you do both A and B pillars it might look good. I just realized the rear pillars actually go from black plastic to grey headliner.
Post pics if you end up replacing them, maybe I'll give it another shot.
Last edited by gbk; 03-29-2017 at 05:19 PM.
03-29-2017, 06:21 PM
#39
I got nothing
http://m.ebay.com/itm/252687992644?_mwBanner=1
hope this link works. I have not received this yet and does say has adhesive so hoping fits like what I have with the added adhesive.
Yes C pillars are black so I figured change a and b pillars uppers to black. The lowers are black. I should change headliner to black at same time ? I consider the cost of headliner.
I still need to figure out the door panels to black I have a vim from an xlt sport. I like the gray inserts at top middle of these. I like the chrome ring around the speakers on the lariat and ambient lights , it's the wood trim I don't like though. Are these pieces replaceable. I may end up with black Lariat door panels
hope this link works. I have not received this yet and does say has adhesive so hoping fits like what I have with the added adhesive.
Yes C pillars are black so I figured change a and b pillars uppers to black. The lowers are black. I should change headliner to black at same time ? I consider the cost of headliner.
I still need to figure out the door panels to black I have a vim from an xlt sport. I like the gray inserts at top middle of these. I like the chrome ring around the speakers on the lariat and ambient lights , it's the wood trim I don't like though. Are these pieces replaceable. I may end up with black Lariat door panels
03-30-2017, 09:05 AM
#40
Senior Member
Lol it's not a sport! Haha I did a full conversion to black. My original trim is a xlt in medium earth grey. My conversion still has a few missing pieces like the lariat dashboard panel and OEM leather but.... SOON!
Edit: the glove box and the driver side knee panel are very easy to change out if you want to replace them with black panels and it won't break the bank.
Edit: the glove box and the driver side knee panel are very easy to change out if you want to replace them with black panels and it won't break the bank.