Putco Blade LED Light Bar 60" RED
#21
Senior Member
Just got my new bar installed. Also found that Putco has updated wiring diagram and wiring so that you can hardwire it to trucks with LED taillights.
Putco Blade Red with LED Wiring
Putco Blade Red with LED Wiring
Last edited by Markc1; 07-11-2018 at 06:13 AM.
#22
I am surprised they didn't just put on one of these:
http://www.amazon.com/CURT-55384-Cus...573D02Z9BD3FZ3
they even have a splitter to a 5 pin flat so you can run a bullet crimp to the 5th pin for the turn signal. Some guys have had issues with using the flat 5 pin so they get the 4 pin splitter and wire the turn to the rear tail lights turn signal. Either way the splitter just plugs in under the hitch and you don't have anything sticking out that you can see.
http://www.amazon.com/CURT-55384-Cus...573D02Z9BD3FZ3
they even have a splitter to a 5 pin flat so you can run a bullet crimp to the 5th pin for the turn signal. Some guys have had issues with using the flat 5 pin so they get the 4 pin splitter and wire the turn to the rear tail lights turn signal. Either way the splitter just plugs in under the hitch and you don't have anything sticking out that you can see.
#23
OK update of my own....the place i was originally having the led bar installed said they could do it if i used that amazon link you provided so i might give it a shot again!
#24
Senior Member
#25
Senior Member
Yeah the place that installed mine puts those wiring harness in also. But they try to charge $60 bucks for them😬. So I didn't get that as my wiring was already done from previous light bar that failed. With wiring diagrams it is much easier now and I like the fact of wiring up in taillight area instead of exposed under truck.
#27
Senior Member
The hardest part is adding the bridge wire as there is not a lot of room where you have to add it.
Shop that did mine originally only charged me $40 bucks to install but I think that is low.
#28
Just a quick question....that link from Amazon seems to offer an easy install....but the putco link shows a pretty indepth wiring option. Is the putco bar that much better? I want to be sure before I have the store use the amazon hitch connector and the trailfx led bar. i am researching and don't see why the difference!
#29
Just got my new bar installed. Also found that Putco has updated wiring diagram and wiring so that you can hardwire it to trucks with LED taillights.
Putco Blade Red with LED Wiring
Putco Blade Red with LED Wiring
#30
Senior Member
Yeah these instructions are so new. My bar didn't come with them either. My buddy got these from Putco when he asked them a question about it.