Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by:

Parking Garage Clearance Help - 2018 Screw 2in level with 34.5s

Thread Tools
 
Search this Thread
 
Old 06-09-2019, 07:06 PM
  #1  
Junior Member
Thread Starter
 
18ScrewLariat's Avatar
 
Join Date: Jun 2019
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default Parking Garage Clearance Help - 2018 Screw 2in level with 34.5s

Hey All - I want to finally pull the trigger on a front level and some bigger tires. Initial plan is for Fox 2.0s and adding Raptor take-offs (wheels and tires). My concern is the overall peak height of the cab. I have to park in a 6'8 garage at work but have seen a few trucks with a lift in there. Does anyone with a similar setup know the overall vehicle height? Would a 6'8 garage be pushing it, I have parked in 6'7 garages as well. Any thoughts/advice are appreciated!
Old 06-09-2019, 07:29 PM
  #2  
Member
 
rxryanm's Avatar
 
Join Date: Feb 2019
Location: KY
Posts: 43
Received 15 Likes on 12 Posts
Default

I have 35s and Icon Stage 1 on my '16 4x4. Fairly certain my ground to fender measurement is ~40 inches. I've been under a 7' clearance sign and could easily reach out and touch the sign through my sunroof.

I think you'd be pushing it, honestly. But I'm sure someone with more knowledge will chime in soon.
Old 06-09-2019, 10:07 PM
  #3  
Member
 
Slammed68's Avatar
 
Join Date: Mar 2016
Posts: 45
Received 7 Likes on 7 Posts

Default

My antenna scrapes on everything in a 6'8" garage but no issues other than that. Running an Icon stage 2 level and 34.5s
Old 06-09-2019, 10:22 PM
  #4  
Senior Member
 
Wanna Ride's Avatar
 
Join Date: Jun 2013
Posts: 1,703
Received 539 Likes on 334 Posts

Default

Somewhere on here recently, somene posted a diagram that showed dimensions.... if I remember correctly.
Old 06-10-2019, 11:41 AM
  #5  
Flaccid Member
 
DeltaNu1142's Avatar
 
Join Date: Sep 2016
Location: Maine
Posts: 2,157
Received 569 Likes on 358 Posts
Default

Originally Posted by Wanna Ride
Somewhere on here recently, somene posted a diagram that showed dimensions.... if I remember correctly.
I did this quite awhile ago for 13th gens... it's also linked in my signature.
Old 06-10-2019, 05:46 PM
  #6  
Senior Member
 
mandrew13's Avatar
 
Join Date: Feb 2013
Posts: 132
Received 33 Likes on 24 Posts

Default

I know my truck fits inside 6-8 garages; the radio antenna touches, but everything else clears. You can see my setup in the signature; I think you should be good to go with your 6'8'' garage.

Last edited by mandrew13; 06-10-2019 at 05:51 PM.
Old 06-10-2019, 06:47 PM
  #7  
Senior Member
 
Eddiegt's Avatar
 
Join Date: May 2018
Location: Nj
Posts: 154
Received 31 Likes on 26 Posts
Default

I'm 7 ' 3" with ladder racks. Watch out for new signs they put in some I seen a truck hit one. I fit in a few not many. I seen one marked 6'5"
I'm going to knock my racks off one day.
Old 06-10-2019, 07:10 PM
  #8  
Member
 
LvlOn33s's Avatar
 
Join Date: Apr 2019
Location: Southern Maryland
Posts: 50
Likes: 0
Received 34 Likes on 21 Posts
Default

My truck has a 2.25” level and 33s, I made it in the 6’8” entrance with little room to spare. Once in, all was good. It was the 6’7” exit that scratched the roof a little.
Old 06-15-2019, 09:55 AM
  #9  
Junior Member
Thread Starter
 
18ScrewLariat's Avatar
 
Join Date: Jun 2019
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks, definitely helpful but I am trying to determine the height before the mods rather than after.
Old 06-15-2019, 09:56 AM
  #10  
Junior Member
Thread Starter
 
18ScrewLariat's Avatar
 
Join Date: Jun 2019
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks! Looking at your setup I would guess you might be a little higher than I am planning on.


Quick Reply: Parking Garage Clearance Help - 2018 Screw 2in level with 34.5s



All times are GMT -4. The time now is 03:30 AM.