When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Here is a decent photo shopped rendition what my RCSB will look like. It starts as an XLT 4x2 (or 4x4) and will be Roush Supercharged 5.0, 3.55 gears and tuned from the dealer in the near future. Once home a bed rug and hard rollable tounneau cover will be installed along with belltech 2/4 lowering kit and rear sway bar. Finally 22 x 9 black 6 spoked wheels with 305/40R22 nitto nt420s tires.
Here is a decent photo shopped rendition what my RCSB will look like. It starts as an XLT 4x2 (or 4x4) and will be Roush Supercharged 5.0, 3.55 gears and tuned from the dealer in the near future. Once home a bed rug and hard rollable tounneau cover will be installed along with belltech 2/4 lowering kit and rear sway bar. Finally 22 x 9 black 6 spoked wheels with 305/40R22 nitto nt420s tires.
I would trade my screw platty the day they release one, would not hesitate!
Heck if I win a lotto, I would convert a platty to a rcsb..that would be awesome!
edit..heck now I need to know what it would cost! Screws have 5.5 ft bed, that would be the old bronco length!
Keep us posted or better yet start a Build Thread!
They come in one length directions indicate you have to cut to length for super cab or regular cab. Also you have to drill holes as there is no factory grommet into the cab. I used a hacksaw with a new blade and wasn't that bad once I got going with it although I was initially stressed about it. I left them 14" extended past the cab so I can reach the tonneau. As a regular sized female I'm not worried about bending the end of the board with my weight...
08-25-2018, 06:43 PM
