Truckin

iTrader: (4)

Dang I like that color! looks good

dkj313

just getting us back on track drove it the other day, before i placed my order the only 5.0 I could find.

First impression was wow on the 10 speed trany gonna love it

OCMike

iTrader: (1)

Glad to hear you like the 10 speed with the 5.0...Mine now is officially built! I'm getting excited.


Mike

J-MAN8

Qbtruck112v Is the box I used.

dkj313

Since we're talking mods here is a list of parts I found to pull out the center seat and install the mini console from a 250 buyer beware haven't done this yet but will soon

5.Bro

Had HIDs installed 5k
Low beams and fog lights. I also ordered 22 inch rims. Should be here tuesday.

lan04

I would welcome any suggestions for behind the seat storage options for my 2018 regular cab. Thanks

Husker

iTrader: (4)

I've used drawstring bags for over 20 years in the RC's I've owned. One bag has Bunji cords & ratchet straps, another has Jumper cables, another has Microfiber Towels cleaning stuff.

It's fairly easy to rearrange em for tall people and or when ya need to throw something else back there!

I don't really worry about the organization behind the seat...I'm the only one who sees's & uses the behind the seat space!

Alan in bc

When we traded our 2009, with plenty of storage behind the seats, for our 2016, we were disappointed with the small, not very useful space in the new cab. Since we have a canopy on the truck all the time, I put the jack in the back and built this shelf to hold laptop bag, camera bag, grocery bags, beverage packs, and small luggage, etc. Cutting the bottom off of the fuzzy black liner at the back of the cab really opened things up.

The shelf is exactly sized to not interfere with the seats being fully "back" on the tracks, and the seats can be reclined as far back as possible and not touch the shelf. I thought about painting the white plastic black, but thinking about the chance of it peeling later, I left it. It isn't visible with the seats in position. The shelf is held down by the original fastener anchor for the jack on the passenger's side and a stainless bolt, M8 I think, and I installed a 1/4" threaded insert into the driver's side to hold down that end. ( also replaced the plastic push fasteners in the remaining panel behind the seat with inserts and stainless bolts and washers)

The seat slides over the flat of tools, etc. on the floor.

motsco

you have a 6’ box behind the seats- toolbox and bed cover