Oem Led heads ballasts...
#21
One Clean Machine
Thread Starter
iTrader: (5)
Ricky, yah dont know. Hoepfully, Mf will chime backmin with part #'s for the ballast screws.
Id prefer to buy the black edition oem leds complete from raptor retrofits. But, seeing he jumped the price to 2500.00, when they were 1650.00
I found a dealer, selling the black editions, for 610.00 per side new. But I still need the 2 ballsts, all the ballast screws, and plastic bottom piece. Plus the wiring harness.
Which will put the heads around 1750.00 for everything.
Eventually, Ill get a pr of KR non blis leds, but 1st I want the oem led heads. So I can see better, while driving at nite. I mean my oem halogens are ok, after I adjusted them(came aimed way to high from the factory) but, imo the output doesnt compare to my previous oem hids, or the new oem led heads.
Id prefer to buy the black edition oem leds complete from raptor retrofits. But, seeing he jumped the price to 2500.00, when they were 1650.00
I found a dealer, selling the black editions, for 610.00 per side new. But I still need the 2 ballsts, all the ballast screws, and plastic bottom piece. Plus the wiring harness.
Which will put the heads around 1750.00 for everything.
Eventually, Ill get a pr of KR non blis leds, but 1st I want the oem led heads. So I can see better, while driving at nite. I mean my oem halogens are ok, after I adjusted them(came aimed way to high from the factory) but, imo the output doesnt compare to my previous oem hids, or the new oem led heads.
Last edited by Toddman38; 11-06-2016 at 09:37 PM.
#23
One Clean Machine
Thread Starter
iTrader: (5)
#26
One Clean Machine
Thread Starter
iTrader: (5)
Thanks guys, so MF, there 5 screws needed per side? 3 for each ballst, and 2 for the plastic bracket?
The following users liked this post:
Toddman38 (11-06-2016)
#30
One Clean Machine
Thread Starter
iTrader: (5)