OEM Ambient Lighting Installed in 2015 XLT, MFT Controlled, Success
11-09-2016, 06:53 PM
#101
Senior Member
Glad that was the right part.
"Finished" mine today worked with myford touch and now sync 3
"Finished" mine today worked with myford touch and now sync 3
The following users liked this post:
mdomicolo (08-05-2020)
11-09-2016, 07:45 PM
#103
Senior Member
11-09-2016, 08:04 PM
#105
Senior Member
The following 5 users liked this post by flsdiver:
Dagojoe (05-24-2018),
Firerunner (11-10-2016),
itsleo (07-29-2017),
MikeTHIS (08-03-2017),
TexasFording (11-14-2016)
11-14-2016, 10:23 AM
#107
I have a question!
Do the LEDs turn on when connected to a power source or do they require being connected to the bcm\apim?
If they do turn on with only power what's the default color?
I swapped my doors and they already have all the LEDs in place can I just tap them to 12v and use them on a single uncontrolled color?
Do the LEDs turn on when connected to a power source or do they require being connected to the bcm\apim?
If they do turn on with only power what's the default color?
I swapped my doors and they already have all the LEDs in place can I just tap them to 12v and use them on a single uncontrolled color?
Last edited by gbk; 11-14-2016 at 10:27 AM.
11-14-2016, 10:25 AM
#108
Senior Member
iTrader: (14)
Recap/compilation of instructions/pictures/part numbers, i can also keep edits going here:
OEM Ambient Lighting Install Google Docs
OEM Ambient Lighting Install Google Docs
The following users liked this post:
mdomicolo (08-05-2020)
11-14-2016, 10:29 AM
#109
I have a question!
Do the LEDs turn on when connected to a power source or do they require being connected to the bcm\apim?
If they do turn on with only power what's the default color?
I swapped my doors and they already have all the LEDs in place can I just tap them to 12v and use them on a single uncontrolled color?
Do the LEDs turn on when connected to a power source or do they require being connected to the bcm\apim?
If they do turn on with only power what's the default color?
I swapped my doors and they already have all the LEDs in place can I just tap them to 12v and use them on a single uncontrolled color?
The following users liked this post:
mdomicolo (08-05-2020)
11-14-2016, 10:33 AM
#110
Senior Member
iTrader: (14)
I have a question!
Do the LEDs turn on when connected to a power source or do they require being connected to the bcm\apim?
If they do turn on with only power what's the default color?
I swapped my doors and they already have all the LEDs in place can I just tap them to 12v and use them on a single uncontrolled color?
Do the LEDs turn on when connected to a power source or do they require being connected to the bcm\apim?
If they do turn on with only power what's the default color?
I swapped my doors and they already have all the LEDs in place can I just tap them to 12v and use them on a single uncontrolled color?
