N-Fab light bar and Rigid Radiance 30" LED bar
09-09-2016, 03:13 PM
#1
N-Fab light bar and Rigid Radiance 30" LED bar
I installed this setup about a week ago and couldn't be happier. The install was fairly smooth, the hardest part was getting the wiring harness mounted and hidden the way that I wanted. Figured I'd post these in case anyone else was looking to do the same. I didn't find many pics when I was researching it.
The following 3 users liked this post by RacerX:
09-09-2016, 11:28 PM
#7
Junior Member
Join Date: Feb 2016
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I installed this setup about a week ago and couldn't be happier. The install was fairly smooth, the hardest part was getting the wiring harness mounted and hidden the way that I wanted. Figured I'd post these in case anyone else was looking to do the same. I didn't find many pics when I was researching it.
Trending Topics
09-10-2016, 05:58 AM
#8
Here's the link for the bar
http://n-fab.com/products/sfID1/75/s.../productID/954
It is a very sturdy mount, it bolts directly to the bumper by using one existing bumper bolt and another that you have to drill. It was very easy to drill and bolt up. There is some cutting involved too. You have to remove the black plastic trim piece from the center of the bumper. You end up cutting 2 channels in this piece for the mounting brackets to come out of. The directions on N-fabs site are really good and they give you good measurements so you don't mess this part up. The install instructions are included in the link above.
The bar also has multiple mounting points for lights, it fits a 30" bar perfect but can also be setup with a 20" bar and 2 dually or you can mount 7 duallys (theres pics of this in the link too)
http://n-fab.com/products/sfID1/75/s.../productID/954
It is a very sturdy mount, it bolts directly to the bumper by using one existing bumper bolt and another that you have to drill. It was very easy to drill and bolt up. There is some cutting involved too. You have to remove the black plastic trim piece from the center of the bumper. You end up cutting 2 channels in this piece for the mounting brackets to come out of. The directions on N-fabs site are really good and they give you good measurements so you don't mess this part up. The install instructions are included in the link above.
The bar also has multiple mounting points for lights, it fits a 30" bar perfect but can also be setup with a 20" bar and 2 dually or you can mount 7 duallys (theres pics of this in the link too)
09-10-2016, 10:49 AM
#9
So it says won't work with front mount radar. I assume that has to do with all the adapative cruise, and collision warning stuff? If so that sucks. Hopefully someone will come out with a work around.