Moonroof Adjustment Procedure Help
#1
Moonroof Adjustment Procedure Help
If anybody has a shop manual that outlines the procedure involved in adjusting the moonroof to fit flush with the roofline, could you possibly scan the page(s) and either send it to me in a PM or post it here. Thanks in advance
Schlim66
Schlim66
#2
Not being rude but legit question; when a vehicle is still under warranty, why would you do something like this yourself?
#3
Schlim66
Last edited by schlim66; 12-24-2015 at 07:51 PM.
#4
That's cool, I get that. Stuff like adjusting a sunroof just seems really finicky to me, at my personal skill level I'd probably avoid it but I can understand where you're coming from.
#6
Senior Member
iTrader: (1)
This might be of some help, but I'm not sure its going to fix what you're describing.
501-17B Roof Opening Panel - Vehicles With: Vista Roof Opening Panel 2015 F-150
General Procedures Procedure revision date: 09/24/2015
--------------------------------------------------------------------------------
Power Roof Opening Panel Initialization
Initialization
WARNING: Keep objects and body parts clear of the glass panel when carrying out the initialization procedure. During the initialization procedure, the glass panel closes with high force and cannot detect objects in its path. Failure to follow this instruction may result in serious personal injury.
NOTE: The roof opening panel motor must be initialized when repairs are carried out on the roof opening panel system, including: any time the roof opening panel motor has been removed, the roof opening panel glass (fixed panoramic or front sliding) has been removed or adjusted, or if the roof opening panel frame has been removed.
NOTE: Initializing includes both the roof opening panel glass motor and the shield (sunhade) motor.
Place the roof opening panel sliding glass in the closed position.
With the driver’s door closed, place the ignition switch ON and wait for the overhead console lights to turn off.
NOTE: Steps 3 - 5 are to set up the overhead console to accept roof opening panel switch inputs to be held for up to a maximum of 150 seconds. Normally, the overhead console will consider the switch stuck after 30 seconds and ignore those longer inputs from the switch.
Steps 3 - 4 must be performed within 3 seconds.
Press the left map light once.
Press the right map light 4 times.
Press the left map light once.
NOTE: Step 7 must begin within 2 seconds of releasing the switch at the end of step 6.
Press and hold the roof opening panel sliding glass close switch until the roof opening panel glass moves to the closed (hard stop) and then the vent position, and the shield fully opens, then release the switch.
Press and hold the roof opening panel sliding glass close switch again until the roof opening panel sliding glass fully opens and closes and then the shield fully closes.
Release the switch and verify proper operation.
Copyright © 2015 Ford Motor Company
--------------------------------------------------------------------------------
501-17B Roof Opening Panel - Vehicles With: Vista Roof Opening Panel 2015 F-150
General Procedures Procedure revision date: 09/24/2015
--------------------------------------------------------------------------------
Power Roof Opening Panel Initialization
Initialization
WARNING: Keep objects and body parts clear of the glass panel when carrying out the initialization procedure. During the initialization procedure, the glass panel closes with high force and cannot detect objects in its path. Failure to follow this instruction may result in serious personal injury.
NOTE: The roof opening panel motor must be initialized when repairs are carried out on the roof opening panel system, including: any time the roof opening panel motor has been removed, the roof opening panel glass (fixed panoramic or front sliding) has been removed or adjusted, or if the roof opening panel frame has been removed.
NOTE: Initializing includes both the roof opening panel glass motor and the shield (sunhade) motor.
Place the roof opening panel sliding glass in the closed position.
With the driver’s door closed, place the ignition switch ON and wait for the overhead console lights to turn off.
NOTE: Steps 3 - 5 are to set up the overhead console to accept roof opening panel switch inputs to be held for up to a maximum of 150 seconds. Normally, the overhead console will consider the switch stuck after 30 seconds and ignore those longer inputs from the switch.
Steps 3 - 4 must be performed within 3 seconds.
Press the left map light once.
Press the right map light 4 times.
Press the left map light once.
NOTE: Step 7 must begin within 2 seconds of releasing the switch at the end of step 6.
Press and hold the roof opening panel sliding glass close switch until the roof opening panel glass moves to the closed (hard stop) and then the vent position, and the shield fully opens, then release the switch.
Press and hold the roof opening panel sliding glass close switch again until the roof opening panel sliding glass fully opens and closes and then the shield fully closes.
Release the switch and verify proper operation.
Copyright © 2015 Ford Motor Company
--------------------------------------------------------------------------------
The following users liked this post:
schlim66 (12-24-2015)
The following 3 users liked this post by i8iridium:
Trending Topics
#8
The following 4 users liked this post by i8iridium: