MaxTrac Lift 7" / 4.5"
The following users liked this post:
Twin snail putput (03-18-2023)
The following 2 users liked this post by jgut12:
spdracer50 (02-21-2017),
white_dc (02-21-2017)
#13
I have a 2015 screw EB 2wd I just had a 6" RC lift kit installed today and the front sits lower than the rear by about 2", would the Eibach Pro Truck or Bilstein 5100 shocks raise the front of my truck up more even though I have the RC suspension lift already on it?
#14
Fake Ballin for da Gram
iTrader: (12)
Looking good bro!
You can try it or replace the 5.5" block that comes with the RC kit with a shorter block.
You can either try using 5100 or Eibachs or you can go the budget route and use a takeoff set of 4x4 springs/shocks. There was another member that is running the 4x4 front shocks and springs on his RC 2wd and he gained another 1.5"
I have a 2015 screw EB 2wd I just had a 6" RC lift kit installed today and the front sits lower than the rear by about 2", would the Eibach Pro Truck or Bilstein 5100 shocks raise the front of my truck up more even though I have the RC suspension lift already on it?
You can either try using 5100 or Eibachs or you can go the budget route and use a takeoff set of 4x4 springs/shocks. There was another member that is running the 4x4 front shocks and springs on his RC 2wd and he gained another 1.5"
#15
Looking good bro!
You can try it or replace the 5.5" block that comes with the RC kit with a shorter block.
You can either try using 5100 or Eibachs or you can go the budget route and use a takeoff set of 4x4 springs/shocks. There was another member that is running the 4x4 front shocks and springs on his RC 2wd and he gained another 1.5"
You can try it or replace the 5.5" block that comes with the RC kit with a shorter block.
You can either try using 5100 or Eibachs or you can go the budget route and use a takeoff set of 4x4 springs/shocks. There was another member that is running the 4x4 front shocks and springs on his RC 2wd and he gained another 1.5"
#16
Fake Ballin for da Gram
iTrader: (12)
Search the member builds section. It was a black 15+ supercrew 2wd with the RC lift, I cannot remember what the member's name was
#17
Senior Member
Thread Starter
Maxtrac 6" lift.
Hi guys,
Thanks for all the great advice, I must say without this forum I would be lost. I did the lift a couple days ago I wanted to share some of the pictures with you guys.
I want to put this out there, hopefully this will help someone else who is looking to do this in the future.
I used the Maxtrac Spindles upfront with Bilstein 5100 Adjustable Shocks. I set the shocks to 1.26". In the rear, I used the Maxtrac 4" blocks with BDS Fox 2.0's. I think it might have been a little bit more level if I set it up to 1.75". I didn't want to risk having the truck nose high so I played it safe.
Thanks to lametrodad for meeting up with me and giving some great tips and the opportunity to check out his setup.
I've got along way to go but, I think this was a good start.
Hope you guys like it!
Thanks for all the great advice, I must say without this forum I would be lost. I did the lift a couple days ago I wanted to share some of the pictures with you guys.
I want to put this out there, hopefully this will help someone else who is looking to do this in the future.
I used the Maxtrac Spindles upfront with Bilstein 5100 Adjustable Shocks. I set the shocks to 1.26". In the rear, I used the Maxtrac 4" blocks with BDS Fox 2.0's. I think it might have been a little bit more level if I set it up to 1.75". I didn't want to risk having the truck nose high so I played it safe.
Thanks to lametrodad for meeting up with me and giving some great tips and the opportunity to check out his setup.
I've got along way to go but, I think this was a good start.
Hope you guys like it!
The following 4 users liked this post by spdracer50:
The following users liked this post:
white_dc (03-03-2017)